OEM Metal Milling Turning Service Aluminum CNC Machining Parts

The machining method of the surface of CNC machined parts first depends on the technical requirements of the machined surface. However, it should be noted that these technical requirements are not necessarily the requirements specified in the part drawings, and sometimes they may be higher than the requirements on the part drawings in some respects due to technological reasons. The processing requirements of the surface of the workpiece, or because it is used as a precision benchmark, it may put forward higher processing requirements.

When the technical requirements of the surface of each CNC machined part are clarified, the final processing method that can guarantee the requirements can be selected accordingly, and the processing methods of several working steps and each working step can be determined. The selected processing method of CNC machined parts should meet the requirements of parts quality, good processing economy and high production efficiency.

For this reason, the following factors should be considered when selecting a processing method:

1. The machining accuracy and surface roughness that can be obtained by any cnc machining method have a considerable range, but only in a narrow range is economical, and the machining accuracy in this range is the economic machining accuracy. For this reason, when selecting the processing method, the corresponding processing method that can obtain economical processing accuracy should be selected.

2. Consider the properties of the cnc workpiece material.

3. Consider the structural shape and size of the CNC workpiece.

4. To consider productivity and economic requirements. High-efficiency advanced technology should be used in mass production. It is even possible to fundamentally change the manufacturing method of the blank, which can reduce the labor of machining.

Product parameters: