Agricultural Sheet Metal Custom Fabrication Stainless Steel Bending Stamping Parts

Sheet Metal Fabrication Stainless Steel Bending Stamping Parts

Stainless steel sheet metal processing refers to the process of forming metal sheets (such as blanking, cutting, etc.) or rolling them into products with various presses and dies to make them larger in size and better in performance.

Sheet metal processing includes many contents: cold work sheet metal, hot work sheet metal; stamping parts, welded parts; machined parts, plastic die forgings; casting parts, etc.

Stainless steel sheet metal processing features:

1. The thickness tolerance of stainless steel material is large (±0.02mm), and the hardness is high;

2. The bending and tensile strength of stainless steel materials are lower than that of carbon steel;

3. Stainless steel materials are prone to cracks;

4. Due to the material, it cannot be heat treated;

5. Weld cracks and deformation will occur during welding;

6. Due to the existence of nickel element, it is prone to intergranular corrosion;

7. Due to its material, it will harden after annealing;

8. Due to its material, it will cause scratches on its surface;

9. Due to its material, it will cause poor mirror effect in the polishing process;

10. Because of its high density, it will make the quality of the product heavier;

11. Because of the presence of nickel, the corrosion resistance of the product during use will decrease;

12. Because of its magnetic properties, it has a certain adsorption effect on magnets;

13. Because of the copper element, it will interfere with it during welding;

14. The high chromium content will cause black skin on the steel surface;

15. It is easy to cause broken wires in the process of drawing;

16. Degreasing must be carried out before electroplating;

17. It is necessary to use lye when pickling;

18. The workpiece must be preheated before coating;

19. Many times of cold rolling are required in the production process;

20. The products produced need to be checked manually for many times;

21. In the production process, it is necessary to perform multiple straightening times.

Product parameters: