Electrical Rotary Union Support Transmit Mixed Power And Signals

Description of 31002006 Hollow Shaft Slip Ring

The hollow 100mm pneumatic rotary joint is designed to handle a maximum pressure and flow rate of the gas or fluid being transferred. The hollow center allows for a rotating shaft to pass through the center of the joint, which is useful in applications where the rotating component needs to be driven by a motor or other mechanical device.

Overall, a hollow 100mm pneumatic rotary joint is an important component in many industrial applications where the transfer of gas or fluid is required in a rotating system.

SENRING two passage Hollow Shaft Rotary Unions 31002006 series is 2 in 2 out hollow bore rotary union,standard hollow shaft size 100mm,other hollow shaft size can be customized,Can be installed with mechanical arm to rotate together.

Features of 31002006 Hollow Shaft Slip Ring

1. Can be installed with mechanical arm to rotate together ;

2. Support transmit mixed power and signals,such as USB,HDMI, 1000M ethernet, VGA, DVI, coaxial RF (high frequency),servo motor signal,industrial bus slip rings...etc;

3. 360° transmit compressed air,steam,vacuum,negative pressure,positive pressure...etc;

4. Max. Pressure(s):1Mpa (vacuum: -100kPa, higher Pressure can be customized)；

5. Support 2 G1/8" port for 6~8mm pipes;

6. Standard hollow shaft size 100mm.

When selecting a hollow 100mm pneumatic rotary joint for a specific application, there are several factors to consider. These include:

1. Pressure and flow rate: It is important to choose a rotary joint that can handle the maximum pressure and flow rate of the gas or fluid being transferred in the system. This will ensure that the joint operates efficiently and effectively.

2. Size and weight: The size and weight of the rotary joint should be considered to ensure it fits the available space and can be easily mounted to the fixed and rotating components of the system.

3. Sealing: The rotary joint should have effective sealing to prevent gas or fluid leakage. The type of seal used will depend on the type of gas or fluid being transferred and the operating conditions of the system.

4. Material: The material used to construct the rotary joint should be compatible with the gas or fluid being transferred and the environmental conditions of the application. Common materials used include stainless steel, brass, and aluminum.

5. Rotational speed: The rotational speed of the system should be considered when selecting a rotary joint. Higher rotational speeds may require a more specialized and durable rotary joint.

6. Temperature: The temperature of the gas or fluid being transferred and the environmental temperature of the application should be considered when selecting a rotary joint. High temperatures may require a specialized seal or material.

Part no. description

Drawing

Standard model list

Drawing

Standard model list

Technical Specification of 31002006 series slip ring