2 Passage Electrical Rotary Union Joint 50mm Hollow Shaft
2 Passage Hollow Shaft Rotary Unions Can Be Installed With Mechanical Arm To Rotate Together
Description of 3502006 Hollow Shaft Slip Ring
SENRING 2 passage Hollow Shaft Rotary Unions 3502006 series is 2 in 2 out hollow bore rotary union, standard hollow shaft size 50mm, other hollow shaft sizes can be customized.
Advantages:
1. Compact size: The small size of the rotary joint makes it a good choice for applications where space is limited.
2. Lightweight: The lightweight design of the rotary joint makes it easy to install and reduces the load on the rotating component of the system.
3. Low torque: The rotary joint has a low torque, reducing the energy required to rotate the system and improving overall system efficiency.
4. Easy installation: The rotary joint can be installed with just two connectors, making it easy to install and maintain.
5. High reliability: The rotary joint features a simple design with few moving parts, reducing the likelihood of system failure and improving overall reliability.
6. Customizable: The rotary joint can be customized to meet the specific needs of a particular application, including pressure and flow rate, size and weight, sealing, material, rotational speed, and temperature.
Technical Specification of 3502006 Hollow Shaft Slip Ring
| Passages(Gas) | 2 passages |
| Pipe Size | 6~8mm pipe, G1/8"; Port |
| Mechanical Data | |
| spec. | data |
| Working life | 20millions for ref(depends on working conditions) |
| Max. Operating Speed | 250RPM continously, 1000RPM intermittently |
| Working temp. | -30°C~80°C |
| Work humidity | 0~85% RH |
| Contact Materia | Precious Metal |
| Housing Material | aluminum alloy |
| IP Grade | IP51 |
| Max. Operating Pressure | Positive Pressure 1Mpa, Vacuum -90kPa | |
| torque | <0.2N.m | |
| Electrical Data | ||
| spec. | data | |
| Power | Signal | |
| Voltage range | 0~440VAC/VDC | 0~440VAC/VDC |
| Insolution resistance | <500MΩ/300VDC | <500MΩ/300VDC |
| Lead wire spec. | AWG17# Silver-plated teflon wire | AWG22# Silver-plated teflon wire |
| Lead wire length | standard 250mm (can be customized) |
|
| Insolution resistance | 500VAC@50Hz,6s | |
| Electrical noise | <0.01Ω | |
Features of 3502006 Hollow Shaft Slip Ring
1. It can be installed with a mechanical arm to rotate together, which is useful in applications where the rotating component needs to be driven by a motor or other mechanical device.
2. It supports the transmission of mixed power and signals, such as USB, HDMI, 1000M ethernet, VGA, DVI, coaxial RF (high frequency), servo motor signal, industrial bus slip rings, etc. This allows for a wide range of applications.
3. It can transmit compressed air, steam, vacuum, negative pressure, positive pressure, etc. This makes it suitable for use in various pneumatic or hydraulic systems.
4. It has a maximum pressure rating of 1Mpa (vacuum: -100kPa, higher pressure can be customized), which is important when selecting a rotary joint for a specific application.
5. It supports 2 G1/8" ports for 6~8mm pipes, which allows for easy connection to the pneumatic or hydraulic system.
6. It has a standard hollow shaft size of 50mm, which is a common size for rotary joints.
Part no. description
Drawing
Standard model list
| Model | Passages(Gas) | Port Size | Pipe Size |
| 3502006 | 2 passages | G1/8" | 6∼8mm |
| Model | Passages(Gas) | Port Size | Pipe Size | Power Circuits(10A) | Signal Circuits(5A) | Length L(mm) |
| 3502006-1205 | 2 Passages | G1/8" | 6∼8mm | 0 | 12 | 74 |
| 3502006-1210 | 2 Passages | G1/8" | 6∼8mm | 12 | 0 | 74 |
| 3502006-1805 | 2 Passages | G1/8" | 6∼8mm | 0 | 18 | 100 |
| 3502006-1810 | 2 Passages | G1/8" | 6∼8mm | 18 | 0 | 100 |
| 3502006-2405 | 2 Passages | G1/8" | 6∼8mm | 0 | 24 | 124 |
| 3502006-2410 | 2 Passages | G1/8" | 6∼8mm | 24 | 0 | 124 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.