Dia 20mm - 160mm Forged Steel Balls 60HRC Ball Mill Balls

Huafu Group is located in Zhangqiu district, Shandong Province, 45Km from the Jinan downtown, next to the 309road, enjoying firsthand Information and convenient traffic. Our company covers 80000 ,with over 100 employees, annual production capacity 150000 tons .and registered capital 70 million yuan. The group company consists of Jinan Huafu Forging Joint-stock Co.,Ltd,Shandong Huafu Steel Ball Co.,Ltd and Jinan Xing Tigers of Papermaking Machinery Co.,Ltd.We mainly produces forged steel balls, cast iron balls, steel cylpebs, grinding rods, mill liners, steel, hammer heads, automatic production lines for steel balls & grinding rods, decorative wrought iron products and paper-making machinery, Our products are mainly used in mines, cement plants, building materials, power stations, chemical industry and steel mills etc.

 

 

Carbon steel grinding ball

Carbon steel grinding ball is the most commonly used one. Widely used in mines, power plants, chemical plants and mill factory’s large ball mill. Diameter is 20-150mm. And we can also customize all size of products according to clients’ demand. The main products performance as follow:

Chemical Composition	C(%)	Si(%)		Mn(%)	Cr(%)	Cu(%)	Mo(%)	P(%)	S(%)
	0.42-0.50	0.17-0.37		0.5-0.8	≤0.25	≤0.25	≤0.3	≤0.035	≤0.035
Size	20-150mm(0.8inch-6inch)
Hardness	Serious		Hardness
	Standard Hardness		48-53HRC
	High Hardness		55-60HRC
Impact Value	≥12J/CM^2
Balls Number	≥12000times
Microstructure	M+C(C-Carbide M-Martensite )

 

Manganese steel grinding ball I

Manganese steel grinding ball I is popular in Korea, Japan and North Korea, impact value is more than 12J/CM^2, manganese content is about 0.6-1.0%. This is the cheapest one in the manganese grinding balls. The performance as follow:

Chemical Composition	C(%)	Si(%)		Mn(%)	Cr(%)	Cu(%)	Mo(%)	P(%)	S(%)
	0.48-0.56	0.17-0.37		0.6-1.0	≤0.25	≤0.25	≤0.3	≤0.035	≤0.035
Size	20-150mm(0.8inch-6inch)
Hardness	Serious		Hardness
	Standard Hardness		50-55HRC
	High Hardness		55-60HRC
Impact Value	≥12J/CM^2
Balls Number	≥12000times
Microstructure	M+C(C-Carbide M-Martensite )

 

Manganese steel grinding ball II

Manganese steel grinding ball II with high hardness and corrosion resistance specialty. Mainly used in wet ball mill in mines and quartz sand factories.Has been exported to Pure, Mexico, Spain, India, Australia and South Africa. The specific performance as follow:

 

Chemical Composition	C(%)	Si(%)		Mn(%)	Cr(%)	Cu(%)	Mo(%)	P(%)	S(%)
	0.57-0.65	0.17-0.37		0.7-1.0	≤0.25	≤0.25	≤0.3	≤0.035	≤0.035
Size	20-150mm(0.8inch-6inch)
Hardness	Serious		Hardness
	Standard Hardness		53-58HRC
	High Hardness		55-60HRC
Impact Value	≥15J/CM^2
Balls Number	≥15000times
Microstructure	M+C(C-Carbide M-Martensite )

 

 

Manganese steel grinding ball III

Manganese steel grinding ball III with high manganese content, impact value is more than 15J/CM^2, less wearing. Well exported all over the world. Performance as follow:

Chemical Composition	C(%)	Si(%)		Mn(%)	Cr(%)	Cu(%)	Mo(%)	P(%)	S(%)
	0.62-0.70	0.17-0.37		0.9-1.0	≤0.25	≤0.25	≤0.3	≤0.035	≤0.035
Size	20-150mm(0.8inch-6inch)
Hardness	Serious		Hardness
	Standard Hardness		55-60HRC
	High Hardness		58-63HRC
Impact Value	≥15J/CM^2
Balls Number	≥15000times
Microstructure	M+C(C-Carbide M-Martensite )

 

 

Special steel grinding ball I

This grinding ball is widely used all over the world. High volume hardness and less wearing. Quality is well accepted by the customers. Please kindly check the following detailed performance.

Chemical Composition	C(%)	Si(%)		Mn(%)	Cr(%)	Cu(%)	Mo(%)	P(%)	S(%)
	0.72-0.80	0.17-0.37		0.8-0.9	0.5-0.6	≤0.25	≤0.3	≤0.035	≤0.035
Size	20-150mm(0.8inch-6inch)
Hardness	Serious		Hardness
	Standard Hardness		58-63HRC
	High Hardness		62-65HRC
Impact Value	≥15J/CM^2
Balls Number	≥15000times
Microstructure	M+C(C-Carbide M-Martensite )

 

 

Special steel grinding ball II

This grinding steel ball is one new type steel ball, good toughness and no breakage. It’s the new favorite in the users. Performance as follow:

Chemical Composition	C(%)	Si(%)		Mn(%)	Cr(%)	Cu(%)	Mo(%)	P(%)	S(%)
	0.58-0.65	1.60-1.90		0.65-0.80	0.70-0.90	≤0.25	≤0.3	≤0.035	≤0.035
Size	20-150mm(0.8inch-6inch)
Hardness	Serious		Hardness
	Standard Hardness		58-63HRC
	High Hardness		62-65HRC
Impact Value	≥18J/CM^2
Balls Number	≥18000times
Microstructure	M+C(C-Carbide M-Martensite )