Operation of Tensile Control Screen
(1) Select the beam type and type to be tensioned.
(2) Enter the tensioning task list, determine whether the beam number, beam type, and pedestal number are consistent with the issued ones, and then check the steel beams that need to be stretched, and click OK to enter the tensioning control interface.
(3) After entering, if the tensioning data is correct after the jack is installed, the main control cabinet first presses the [Oil Pump] button to turn on the motor of the pump station and starts to rotate, then clicks the tensioning operation button on the main screen and presses the button in the newly opened interface The [Start] button waits for the auxiliary machine to start, the main machine clicks the [Start] button to become unavailable, and then presses the [Oil Pump] button of the auxiliary control cabinet to start the auxiliary machine pump station, and presses the green [Start] button to start tensioning up.

Technical Parameter of the Synchronous Tensioning System

Advantages of Bridge Numerical Control Tensioning Machine
1. Master-slave machine control mode - the system is composed of a master machine and a slave machine. One master machine can control the construction of multiple slave machines to achieve any combination.
2. Built-in computer system - without an external computer, it can directly control the master and slave machines to ensure that they master and slave machines work at the same time.
3. Language guidance function - during the tensioning process, the tensioning status will be broadcast in real-time to guide the following operation and confirm the tensioning program.
4. Soft start function - frequency conversion control, stable tensioning start, no impact; two-way tensioning synchronization is reasonable.
5. Economical and practical - the cost of the slave machine is lower than that of the master machine, which is beneficial to reduce the overall cost of the system when multiple slave machines are combined.

Tension result data query and export
(1) Click on the host "Extension Report" to enter the operation interface of the tension statement
(2) For Data export, directly click "U disk read and write", select the stretching time in the pop-up dialogue interface, and then click the [Export Data] button to export the corresponding stretching data report, the exported file is in D: Inside the UDisk.
(3) Reporting of stretching results
The change curve of tension force and elongation value is automatically uploaded during the tensioning process, and the tensioning result is automatically uploaded after the tensioning is completed. The beam field management computer simultaneously reports the tensioning process curve and tensioning results to the superior information monitoring center through the network for reference and review.