Description of Ultra-Thin Synchronous Bridge Hydraulic Jack

This method of lifting the jack does not require large-scale lifting equipment, and the entire roof that has been constructed on the ground, including roof waterproofing, paint, and pipelines, can be lifted into place at one time. Generally, there is upward jacking.

Application of Ultra-Thin Synchronous Bridge Hydraulic Jack

Hydraulic jacks are smaller in size and can produce greater working capacity, especially used in places with narrow spaces, and have the functions of lightness, flexibility, and high jacking force. This product is widely used in electric power, the chemical industry, steel, bridges, machinery, etc. And other enterprises, and play its infinite power.

Technical Parameter of Ultra-Thin Synchronous Bridge Hydraulic Jack

Maintenance matters of Ultra-Thin Synchronous Bridge Hydraulic Jack
(1) The bottom of the hydraulic jack should be flat and tough when used. The oil-free wooden board expands the pressure-bearing surface to ensure safety. Iron boards cannot be used instead of wooden boards to prevent sliding.
(2) It is required to be stable when lifting. After lifting the heavy object for a while, check whether there is any abnormality. If there is no abnormality, continue to lift the top. Do not lengthen the handle arbitrarily or operate it excessively.
(3) Not overloaded, super high. When the red line appears on the sleeve, it indicates that the rated height has been reached and the jacking should be stopped.
(4) When several hydraulic jacks are operating at the same time, there must be a special person to command, so that the lifting or lowering can be carried out synchronously. Wooden blocks should be supported between two adjacent hydraulic jacks to ensure intervals to prevent slipping.
(5) When using a hydraulic jack, always pay attention to the sealing part and the pipe joint part, and must ensure its safety and reliability.
(6) Hydraulic jacks are not suitable for places with acid, alkali, or corrosive gas.