NEMA 24 4N.M 60x100mm Close Loop Stepper Motor 1000ppr Pinout 4 Wire
NEMA24 Stepper Motor 4N.M 60x100mm Close Loop Stepper Motor 1000ppr Stepper Motor Pinout 4 Wire. Casun Close Loop Stepper Motor nema17 4N.M 60x100mm Stepper Motor With Nema24 Stepper Motor Controller.
The Close Loop Stepper Motor incorporates a closed-loop control system to enhance performance and accuracy. Key specifications include:
- 4N.m torque: Maximum torque of 4 Newton meters for driving loads and overcoming resistance
- 60x100mm dimensions: Motor diameter of 60mm and length of 100mm
- Closed-loop control: Utilizes feedback sensors to monitor actual position and ensure accurate positioning
The closed-loop control system compensates for missed steps or position errors that may occur in open-loop stepper motors, maintaining precise positioning even with external disturbances or load variations. Ideal for applications requiring high positioning accuracy such as CNC machines, robotics, and automation systems.
- Bipolar or unipolar versions available
- Hybrid stepper construction
- Available in single or double shaft versions
- CE and RoHS approved
- Customizations on request
| Parameter | Value |
|---|---|
| Step Angle | 1.8° |
| Frame Size | 60mm |
| Number of Phase | 2 Phase |
| Rated Current | 3Amp |
| Holding Torque | 4mN.m |
| Resistance | 2.3hm |
| Inductance | 7mH |
| Rotor Inertia | 1400g-cm² |
| Motor Weight | 0.23 kg |
| Encoder Pulse | 1000PPR |
| Connection | Bipolar |
| Parameter | Specification |
|---|---|
| Step Angle | 1.8° |
| Maximum Temperature | 80°C maximum |
| Ambient Temperature | -20°C to 50°C |
| Storage Temperature | -20°C to 100°C |
| Humidity Range | 85% or less, non-condensing |
| Magnet Wire Insulation | Class B 130 deg C |
| Insulation Resistance | 100M Ohm at 500 VDC |
| Dielectric Strength | 500 VDC for 1 min |
| Parameter | Specification |
|---|---|
| Voltage | 5V |
| Output | A + A - B + B - |
| Model | Holding Torque | Step Angle | Length | Type of Shaft | Rated Current |
|---|---|---|---|---|---|
| 42SHD4950 | 0.13N.m | 1.8° | 20mm | D Shaft-20mm | 1.0A |
| 42SHD4003 | 0.26N.m | 1.8° | 34mm | D Shaft-20mm | 0.4A |
| 42SHD0261 | 0.45N.m | 1.8° | 40mm | D Shaft-20mm | 1.68A |
| 42SHD4425 | 0.59N.m | 1.8° | 48mm | D Shaft-24mm | 2.0A |
| 42SHD4813 | 0.8N.m | 1.8° | 60mm | D Shaft-24mm | 2.1A |
If our standard motor cannot meet your needs, we can customize the motor according to your requirements. Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc.
Encoder
Brake
Gearbox
Shaft
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.