NEMA 34 5.6N.m 4axis closed loop 1000PPR stepper motor kits with magnetic encoder for CNC machines

NEMA 34 refers to a standard size for stepper motors, with a mounting flange size of 3.4 inches (86 mm). The "5.6N.m" specification indicates the holding torque of the motor, which is a measure of its ability to maintain position when subjected to external forces. In this case, the motor has a holding torque of 5.6 Newton-meters.
 

A 4-axis closed-loop stepper motor kit with a magnetic encoder is designed for use in CNC (Computer Numerical Control) machines. Closed-loop stepper systems incorporate feedback mechanisms, such as encoders, to monitor the position of the motor shaft and provide feedback to the control system. This allows for more accurate positioning and greater resistance to stalling or losing steps, compared to open-loop stepper systems.
 

The magnetic encoder is a type of position sensor that uses magnets and Hall effect sensors to detect the position of the motor shaft. It provides precise feedback on the motor's position, allowing the control system to make adjustments in real time and ensure accurate movements.
 

Overall, a NEMA 34 5.6N.m 4-axis closed-loop stepper motor kit with a magnetic encoder would be suitable for CNC machines that require high torque and precise positioning capabilities. It provides improved performance and reliability compared to open-loop stepper systems, making it ideal for applications where accuracy is crucial, such as CNC milling, routing, or 3D printing.
 

Features:

• High torque and high precision

• For high-tech industry and electronic industry equipment

• Available in single or double shaft versions

• Established in China for 12 years and has served more than 800 customers.

• Professional research and development manufacturing

Motor Specifications

Operating Specifications

Step Angle: 1.8°

Maximum  Temperature :80°C maximum

Ambient Temperature: -20 °C to 50°C

Storage Temperature -20: °C to 100°C

Humidity Range (%) :85% or less, non-condensing

Magnet Wire Insulation :Class B 130 deg C

Insulation Resistance :100M Ohm at 500 VDC

Dielectric Strength :500 VDC for 1 min

Torque Curves 

Submodels

Download

If our standard motor cannot meet your needs,

we can customize the motor according to your needs

Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc.

Options:

Encoder	Brake	Gearbox	Shaft

Please click the "Get a quote" button below to tell us your requirements.