Cnc Carbide End Mill 2F Flat Endmill HRC45 Milling Cutter CVD Coated 1.5mm 6mm

Characteristic:

• zero point four μ M Extremely fine particles
• Newly upgraded Balchas coating
• Large core diameter design and tempering treatment
• Double edge belt design enhances cutting rigidity
• The 45 ° spiral angle shall be cut smoothly without chip accumulation

Description:

• The imported micro particle tungsten steel base material is adopted, and the carbide round nose knife has higher wear resistance and strength, which extends the service life of the tool; The newly upgraded Balchas coating can directly perform rough machining to fine machining of heat treated materials below 45 °, reduce tool change times and improve processing efficiency; Imported passivation equipment, spray type to enhance the corrosion resistance and wear resistance of the tool, so that the cutting edge is free of burrs and the cutting is smooth; Double edge band design enhances the rigidity of cutting edge and effectively removes burrs; 45 ° spiral angle, smooth cutting without chip accumulation; Large core diameter design enhances rigidity and seismic resistance.

Milling parameters:

				Sloting
				Vc (m/min)	fz(mm/Tooth)
					Diameter
					2	4	6	8	10	12	16	20
				112	0.01	0.018	0.026	0.034	0.041	0.048	0.06	0.069
				92	0.01	0.017	0.025	0.032	0.038	0.045	0.056	0.065
				100	0.01	0.018	0.026	0.034	0.041	0.048	0.06	0.069
				72	0.009	0.015	0.022	0.028	0.034	0.04	0.05	0.058
				64	0.01	0.018	0.025	0.032	0.039	0.045	0.057	0.066
				56	0.009	0.016	0.023	0.029	0.036	0.041	0.052	0.06

				Roughing
				Vc (m/min)	fz(mm/Tooth)
					Diameter
					2	4	6	8	10	12	16	20
				228	0.018	0.031	0.045	0.057	0.070	0.081	0.101	0.118
				208	0.017	0.029	0.042	0.054	0.065	0.071	0.095	0.11
				184	0.018	0.031	0.045	0.057	0.070	0.081	0.101	0.118
				144	0.015	0.026	0.037	0.048	0.058	0.068	0.085	0.098
				132	0.017	0.03	0.042	0.054	0.066	0.077	0.096	0.112
				112	0.015	0.027	0.039	0.05	0.060	0.07	0.088	0.102

	Finish
	Vc m/min	fz(mm/Tooth)
		Diameter
		2	4	6	8	10	12	14	16	18	20
	332	0.028	0.05	0.07	0.091	0.11	0.128	0.144	0.16	0.173	0.186
	272	0.026	0.046	0.066	0.085	0.103	0.12	0.135	0.15	0.162	0.173
	304	0.028	0.05	0.07	0.091	0.11	0.128	0.144	0.16	0.173	0.186
	212	0.023	0.041	0.059	0.076	0.092	0.107	0.121	0.134	0.145	0.155
	196	0.027	0.047	0.067	0.086	0.104	0.122	0.137	0.152	0.165	0.177
	168	0.024	0.043	0.061	0.079	0.095	0.111	0.125	0.139	0.150	0.161

Applications:

Pre-hardened Steel, stainless steel, Die steel, steel plate, Heat-resistant steel,pipe, copper and aluminum, cast iron, Nonferrous Metal, Wood, Plastic,FRP and sO on. General-purpose operation slotting, rilling, profiling.