2500T/m Environmentally Friendly Manual Anodizing Production Line

一. Production Description :

1.Anodizing production lines can incorporate data logging and traceability systems. These systems record and store process parameters, production data, and quality control information for each batch or part, allowing for traceability, analysis, and quality assurance.

2.Anodizing production lines may feature recipe management systems that allow operators to save and recall process parameters and settings for specific part types or customer requirements. This streamlines the setup process and ensures consistent anodizing results for repeat orders.

3. Anodizing production lines often include documentation and reporting capabilities. This allows operators to generate reports on process parameters, production statistics, quality control results, and other relevant data for documentation purposes or customer requirements.

二. Design Condition

三.Process Tank

四.Treatment Process:

1. Degreasing
   (1) 6jig(rack)/ tank x 1 tank=6jig(rack)
   (2) treatment time: 2-5min
2.  Alkaline Etching 
   (1) 6jig(rack) / tank x 2 tank=12jig(rack)
   (2) treatment time: 3-15min
3.  Neutralization
   (1) 6jig(rack) / tank x 1 tank=6jig(rack)
   (2) treatment time: 1-5min           
4.  Anodizing
   (1) 3 jig(rack)/tank x 8tanks = 24jig(rack)
   (2) Current density: 130A/m²
   (3) Process time: 30min
   (4) Unprocess time: 10min
   (5) Total time 30+10=40min      

          (6) Average anodizing layer : 0.36*1.3*30*0.77 =10.81um

5.  Colour 1

                     1) Clour process: Mix Salts

                     2) Quantity:3 jig(rack)/tank x 1tanks = 3jig(rack)

                     3) Current density: 70A

                     4) Process time: 2-8min

      6. Sealing
           1) Sealing menthod:  Sealing at Medium or Normal Temperature
           2) Quantity:6jig(rack)/tank x 1 tank
           3) Process time 10-15min

五. Design Parameter and Setting

       1. Anodizing treatment area:
              1) Each anodizing process tank need 40min ,where total jig(rack)/year:​

                   ( 3 rack x 8 tank x 60min/h) ÷40min x600 hour =21600jig(rack)

2) Design 50m²^/jig(rack) . Where every tank is 100m²
3) Area treatment/year : 21600jig(rack)x 50m² /jig =1080000m²

2. Anodizing treatment weight:
        Monthly output : 1080000m²÷350m²/T*0.9=2777T≧2500T

3. Power consumption:
        1) Anodising Tank:100m²/tank* 130A/ m²÷0.9=14444A/tank

           Power Rectifier : 15000A =3unit
        2) Clouring tank: 100㎡/tank×70A/m²÷0.9 = 7777A/tank

   Colour Rectifier : 8000A =3 unit 

六. Process Chat