SE603 Ultrasonic Energy Meter with TVT Technology RS485 Modbus Communication and No Pipe Modification
The SE603 ultrasonic energy meter is a clamp-on simple type ultrasonic flow meter widely used in flow and energy measurement applications. Based on state-of-the-art TVT technology, it fully meets new standards for energy and environmental savings.
- No Pipe Modification Required: Simple clamp-on design eliminates the need to cut pipes, shut down operations, or stop production
- Easy Installation: Can be installed with a single Phillips-head screwdriver without special tools
- Precise Energy Measurement: PT1000 temperature sensor provides accuracy up to ±0.1℃, ±0.2℃, or ±0.5℃
- Flexible Mounting Options: Hook and snap-on installation methods for wall, pipeline, or rail mounting
- Remote Monitoring: RS485 Modbus communication for remote energy consumption monitoring
- Long Service Life: Ultrasonic technology with no moving parts in contact with fluid
- Minimal Pressure Loss: Wide measuring range with reduced pressure losses
The SE603 is a separate clamp-on ultrasonic energy meter designed for small, medium, and large pipe sizes. Using the ultrasonic principle of transit-time difference method, it sends and receives ultrasonic signals through sensors. The difference between upstream and downstream transit-time through moving liquid is used to calculate flow and velocity. Energy measurement is displayed based on temperature differences from PT1000 sensors at inlet and outlet water points.
- Flow Range: ±0.1m/s ~ ±5m/s (±0.328ft/s ~ ±16ft/s)
- Accuracy: Valued ±2%
- Repeatability: 0.40%
- Pipe Diameter Range: OD9.53～OD110 (Optional)
- Measuring Medium: Regular water, sea water, cooling/hot water, alcohol
- Pipe Material: PVC, stainless steel, carbon steel, copper (Optional)
- Communication Interface: RS485 with Modbus protocol support
- Power Supply: 24V DC
- Keyboard: 4 touch keys
- Display: In-built Backlit OLED 128×64 dot-matrix
- Temperature Range: Transmitter ambient: 32℉~122℉ (0℃~50℃); Transducer medium: 32℉~176℉ (0℃~80℃); RTD measuring: 35.6℉~221℉ (2℃~105℃)
- Humidity: RH 0~95% non-condensing
- IP Rating: IP54
- Working Pressure: 1.6MPa
- Transmitter: Aluminum alloy
- Sensor: Clamp-on type
- Cable: Standard length: 6.6ft (2m)
| DN | OD | OD Range | Inch | Flow Range |
|---|---|---|---|---|
| DN6 | OD9.53 | 9.5mm-12mm | 1/8" | 0.003 ~ 0.142 m³/h |
| DN8 | OD12.7 | 12mm-14mm | 1/4" | 0.011 ~ 0.570 m³/h |
| DN10 | OD15 | 14mm-16mm | 3/8" | 0.026 ~ 1.282 m³/h |
| DN15 | OD20 | 20mm-22mm | 1/2" | 0.046 ~ 2.279 m³/h |
| DN20 | OD25 | 25mm-28mm | 3/4" | 0.103 ~ 5.128 m³/h |
| DN25 | OD32 | 32mm-35mm | 1" | 0.182 ~ 9.116 m³/h |
| DN32 | OD40 | 38mm-45mm | 1-1/4" | 0.285 ~ 14.244 m³/h |
| DN40 | OD50 | 48mm-54mm | 1-1/2" | 0.410 ~ 20.511 m³/h |
| DN50 | OD63 | 58mm-64mm | 2" | 0.729 ~ 36.464 m³/h |
| DN65 | OD75 | 72mm-78mm | 2-1/2" | 1.140 ~ 56.976 m³/h |
| DN80 | OD90 | 86mm-96mm | 3" | 1.641 ~ 82.045 m³/h |
| DN100 | OD110 | 108mm-116mm | 4" | 2.917 ~ 145.858 m³/h |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.