FTTA CPRI Patch Cords DLC to DLC for Remote Fiber Feeder in Base Station BBU RRU RRH LTE Waterproof
FTTA CPRI Outdoor Fiber Patch Cord
The CPRI patch cords are standard size for Duplex LC Connectors, widely used in FTTA,
Base station, and the outdoor waterproof condition. we supplies FTTA (Fiber to the Antenna)
DLC (Dual LC Connector) SM GYFJH 2G.657A patch cord for TD-SCDMA,
WCDMA,CDMA2000, Wimax, 2G, 3G, 4G and 5G Base Station BBU-RRU outdoor. These
products are good for CPRI application.
l Features:
The CPRI patch cords are used for outdoor RRU transmitting optical signal and remote fiber
feeder etc.
Standard Duplex LC connector, well connected with standard LC adaptor
Available Single mode and Multimode
500cycles Mechanical life
Widely used in FTTA & FTTH
Used for 4G 5G base station
BBU, RRU, RRH, LTE
| Item | Data |
| Insertion Loss | ≤0.3dB |
| Return Loss | SM/UPC≥55dB, SM/APC≥60dB, MM≥35dB |
| Mechanical life | 500cycles |
| Working temperature | -20°C~+70°C |
| Storage temperature | -20°C~+70°C |
| Tensile Data | Tensile between junction and fiber cable≥100N |
l Performance:
l Cable Structure:
l Type1: 2×Unit Cable(2.0mm)+2×Stuffing Cable+Jacket OD=7.0mm
| Cable Count | OD (mm) | Weight | Tensile strength | General attenuation | Minimal Bending radius | Storage temperature | ||
| Short term | Long term | Singlemode | Multimode | |||||
| 2 | 7.0±0.2 | 45kg | 900N | 450N | 1310nm ≤0.4dB/km | 850nm ≤3.0dB/km | 20D | -20℃～+70℃ |
| 1550nm ≤0.3dB/km | 1300nm ≤1.0dB/km | |||||||
l Type2: 2×Unit Cable(2.0mm)+Spiral Steel Tube+ Kevlar+Jacket OD=7.0mm
| Cable Count | OD (mm) | Weight | Tensile strength | General attenuation | Minimal Bending radius | Storage temperature | ||
| Short term | Long term | Singlemode | Multimode | |||||
| 2 | 7.0±0.2 | 75kg | 2000N | 1000N | 1310nm ≤0.4dB/km | 850nm ≤3.0dB/km | 20D | -20℃～+70℃ |
| 1550nm ≤0.3dB/km | 1300nm ≤1.0dB/km | |||||||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.