Broadcasting System SMPTE Fiber Connector Photoelectric Hybrid Cable
Photoelectric Hybrid Cable for Broadcasting System
The Photoelectric Hybrid Cable are meet the critical requirements of the new generation of digital HDTV cameras.
The main features of this series are as follows:
- Conforms to the SMPTE 304 M-1998 and 311M-1998 standards and to the European EBU Technical Recommendation R100-1999.
- Security of the Push-Pull self-latching system
- Fitted with the standard 2 fiber optic contacts.
- Length can be customized
- The integrated stainless steel joint guarantees excellent sealing guarantees at least 20,000 mating cycles, and provides higher resistance to severe wear conditions.
1. Optical Cable Component Parameters
|
Performance Parameter |
Index Requirements |
|
Inserting and Pulling Times |
20000 Times |
|
Material |
Shell is Stainless Steel |
|
Protection Level |
IP67 |
|
Salt Spray Performance |
48H |
|
Working Temperature |
-40℃~+85℃ |
|
Connector Loss |
Less than0.6dB |
|
Cable Assembly Retention |
500N |
2. Characteristics of optical cable
|
Cable Diameter |
9.2±0.2mm |
Bending Radius |
|||
|
Fiber Mode |
Single Mode |
Static |
10D |
Dynamic |
20D |
|
Attenuation (After Cabling) |
≤0.4dB/km@1310nm |
Tensile Load |
|||
|
Long Term |
350N |
Short Term |
700N |
||
|
Working Temperature |
Crush Resistance |
||||
|
-40 °C to +85 °C |
Long Term |
500N/10cm |
Short Term |
1000N/10cm |
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.