128X64 Graphical COG LCD Module ST7567 With White Side Backlight HTG12864-20C

Price Negotiable

Price: Negotiable

MOQ: 2

Delivery Time: 25 days

Brand: HOTHMI

Product Description

128X64 Graphic COG LCD ST7567 | FSTN+ Display With White Side Backlight//HTG12864-20C

HTG12864-20C | Monochrome Graphic COG | 128x64 Pixels | Transflective LCD | Side White Backlight | FSTN (+) Positive Display

HOTLCD 128x64 graphic Chip-On-Glass (COG) Liquid Crystal Display shows dark pixels on a white background. This transflective LCD Display is visible with ambient light or a backlight while offering a wide operating temperature range from -20 to 70 degrees Celsius. This HTG12864-20C display has an optimal view of 6:00, operates at 3V supply voltage and is RoHS compliant. This display comes with a built-in ST7567 controller.

Product parameters

ITEM	STANDARD VALUE	UNIT
Number of dots	128x64 DOTS	----
Module dimension	53.2x37.8x2.8	mm
View display area	40.92x24.28	mm
Dot size	0.28x0.34	mm
Dot pitch	0.32x0.38	mm
Operating temp	-20~70	℃
Storage temp	-30~80	℃
Driving Method	1/ 128 DUTY,1/ 12 BIAS,VOP= 3.3V
Viewing direction	6 O’CLOCK
Display mode	FSTN
Display type	TRANSMISSIVE / NEGATIVE
Driver IC	ST7567
Backlight	WHITE

Terminal Function

Pin No.	Pin Name	Function
1	/CS1	This is the chip select signal.
2	/RES	Rester Pin(L->H)
3	A0	A0 = “H”: Indicates that D0 to D7 are display data. A0 = “L”: Indicates that D0 to D7 are control data.
4	/WR	Write (/WR ) control signal input.
5	/RD	Read (/RD ) control signal input.
6~13	DB0-DB7	8bit Date bus, When the serial interface (SPI-4) is selected (P/S = “L”) : D7 :serial data input (SI); D6 : the serial clock input (SCL).
14	VSS	Negative power supply,0V
15~16	NC	NC
17	V0	When internal DC-DC voltage converter is used, external capacitor is connected between these pins.
18	XV0	When internal DC-DC voltage converter is used, external capacitor is connected between these pins.
19~20	NC	NC
21	VG	LCD driving voltages.
22~25	NC	NC
26	C86	This is the MPU interface selection pin. C86 = “H”: 6800 Series MPU interface. C86 = “L”: 8080 Series MPU interface.
27	P/S	This pin configures the interface to be parallel mode or serial mode. P/S = “H”: Parallel data input/output. P/S = “L”: Serial data input. The following applies depending on the P/S status: When P/S = “L”, D0 to D5 must be fixed to “H”. /RD (E) and /WR (R/W) are fixed to either “H” or “L”. The serial access mode does NOT support read operation.
28	VDD	Positive power supply,3.3V

Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For Logic	VDD-VSS	－	2.7	3.0	3.3	V
Supply Voltage For LCM	VOP	Ta=-20℃ Ta=25℃ Ta=70℃	－ 9.15 －	－ 9.45 －	－ 9.75 －	V V V
Input High Volt.	VIH	－	0.7 VDD	－	VDD	V
Input Low Volt.	VIL	－	Vss	－	0.3VDD	V
Output High Volt.	VOH	－	0.8 VDD	－	VDD	V
Output Low Volt.	VOL	－	Vss	－	0.2 VDD	V
Supply Current	IDD	VDD=3.0V	－	0.45	0.9	mA