HDPE Geocell GM356-50mm Pavement Reinforcement Grid for Walkways and Cycle Paths
HDPE Geocell GM356-50mm Pavement Reinforcement Grid for Walkways and Cycle Paths
GEOMAX® GEOCELL PRODUCT INTRODUCTION
SPECIFICATIONS
| Index Properties | Test Method | Units | Values | |||||||
| Material | - | - | 100% Virgin HDPE | |||||||
| Carbon Black content | ASTM D 1603 | % | ≥1.5 | |||||||
| Density | ASTM D 1603 | g/cm3 | 0.935-0.965 | |||||||
| Sheet Thickness ± 3% | ASTM D 5199 | mm | 1.5 | |||||||
| Seam Peel Strength | USACE GL-86-19 | KN/m | ≥14.2 | |||||||
| Tensile strength at Yield | ASTM D 1603 | KN/m | ≥22 | |||||||
| Environmental stress crack resistance | ASTM D 1603 | hrs | ≥5000 | |||||||
| OIT oxidation induction time | ASTM D 1603 | min | ≥150 | |||||||
| Type | GM330 | GM356 | GM400 | GM432 | GM445 | GM500 | GM660 | GM712 | ||
| Welding Distance(mm) ± 3% | 330 | 356 | 400 | 432 | 445 | 500 | 660 | 712 | ||
| Cell Depth(mm) ± 3% | 50,75,100,150,200,250 | |||||||||
| Dimensions | ||||||||||
| Expanded Cell Size (width×length) (mm) ± 3% | 250 x 210 | 260 x 225 | 290 x 260 | 320 x 275 | 315 x 300 | 360 x 300 | 470 x 450 | 510 x 475 | ||
| Expanded Cell numbers(width×length) | 10 x 34 | 9 x 34 | 8 x 34 | 8 x 34 | 8 x 34 | 7 x 34 | 5 x 34 | 5 x 34 | ||
| Expanded Section size (width×length) (m) ± 3% | 2.50 x 7.14 | 2.34 x 7.65 | 2.32 x 8.84 | 2.56 x 9.35 | 2.52 x 10.2 | 2.52 x 11.22 | 2.35 x 15.3 | 2.55 x 16.15 | ||
| Expanded Section Area (m2) ± 5% | 17.85 | 17.9 | 20.5 | 23.94 | 25.7 | 28.74 | 35.95 | 41.18 | ||
DETAILED PHOTOS
APPLICATIONS
 |
SOIL REINFORCEMENTGeomax®(Hdpe Geocell) is the solution to soil stabilization or soil reinforcement. It can increase the bearing capacity of the pavement and avoid cracking of the pavement. |
 |
SLOPE PROTECTIONGeomax®(Hdpe Geocell) is the obvious choice for slope protection or erosion control. It has both good drainage effect and slope protection. |
 |
CHANNEL PROTECTIONGeomax®(Hdpe Geocell) delivers stability and protection of channels |
 |
RETAINING WALLSGeomax®(Hdpe Geocell) offers highly permeable and acts as a great number of planting pots, allowing rainwater to infiltrate, minimizing runoff. |
PRODUCTION LINE
INVENTION AND TESTING
PRODUCT AREA
FAQ:
What specifications do you offer?
We offer a wide range:
-
Depth/Height: 100mm, 150mm, 200mm, 250mm, 300mm.
-
Weld Spacing: Typically 330mm, 400mm, 500mm, or 600mm.
-
Sheet Thickness: Ranging from 1.0mm to 2.0mm+, depending on the product line.
How do I choose the right geocell height?
The height is selected based on the load-bearing requirement and subgrade strength. As a general rule:
-
Lighter loads/stable subgrade: 100-150mm.
-
Standard road bases: 150-200mm.
-
Very soft subgrades/heavy loads: 200-300mm. Our engineering team can provide specific recommendations.
What is the tensile strength of the GeoMax® Geocell?
Tensile strength varies by product. Our standard HDPE geocells typically have a tensile strength exceeding 20 MPa, while our Nano-Composite series can reach 25 MPa or higher. Please refer to our technical data sheets for precise values.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.