PVC Fine Line Masking Tape Heat Resistant Automotive Baking Covered Green
PVC Fine Line Masking Tape For Baking Paint
Descriptions:
Design for masking on painting. This tape will perform in the presence of 163℃ temperatures for at least 60 minutes, and can be removed without adhesive transfer. Excellent adhesion to wide variety of surfaces. Leaves no residue upon removal. Meets the requirements of RoHS 2002/95/EC.
Technical Specification
| Property | Unit | Product code | Test method | |||||
| FL120 | FL150 | |||||||
| Total Thickness |
mm | 0.12 | 0.15 | ASTM-D-1000 | ||||
| Tensile Strength |
N/cm | 15 | 20 | |||||
| Elongation at break |
% | 100 | ||||||
| 180°Peel Adhesion to steel |
N/cm | 1.5 | ||||||
| Flame Resistance | S | <5 | ||||||
| Temperature Resistance |
℃ | 163℃ x 60min No Adhesive transfer on paint | ||||||
| Lead Cadmium | ppm | 30 | US EPA3052 | |||||
| Mercury Chromium | ppm | 10 | US EPA3060A | |||||
| Polybrominated biphenyl | ppm | 10 | US EPA3052C | |||||
Standard Products
| Thickness | 0.12mm, 0.15mm |
| Length | 33m, can be customized |
| Width | 1mm - 1250 mm, can be customized |
| PE core | Diamether 76.2mm |
| Color | Translucent Green, Translucent Blue, Translucent Earthy Yellow |
| Packing | Cushion Ply, Customized |
| Samples | Free,Freight on buyer |
| MOQ | 50 Log rolls |
Applications:
PVC Fine Line Masking Tape is designed for masking on painting.
It is a vinyl paint masking tape for aotomotive baking covered, fascia, rocker panels, two-tone and other Industrial applications where critical paint break lines are required. Suitable for paint masking of metal and plastic surfaces.
Features
Strong viscosity, glue formulation stability
High temperature resistance
No residue left when peeled off
Waterproof & excellent resistance to corrosion
Packaging & Shipping
| Delivery: | 10-15 days after receiving 30% deposit. |
| Packing Details: | 1. Each roll packing with a polybag |
| 2. Cushion Ply | |
| According to customer's requests |
Recommendations
Rolls should be stored flat on their cut edges in the original packaging. The products must be protected from dust, heat, moisture, direct sunlight and solvent fumes. The storage temperature should be between +10℃ and +25℃ x 65%R.H. Use within 12months of receipt. The tape should be applied with sufficient tension to ensure an optimum bonding and a minimum of two layers with a half overlap. The final layer should be wrapped with a lower tension to prevent flagging effects. Surfaces should be clean, dry and free of dust, grease, oil or other contaminants.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.