Permanent Anti Stain Anti Slip Pavement Marking Tapes Particles Temporary Striping Tape
Permanent Anti-stain & Anti-slip Pavement Marking Tapes (Particles Surface)
Description
The surface is free of glass beads, flat, and easy to clean. The base material of the preformed material is composed of polymer flexible polymer rubber, fillers, pigments, etc., and a layer of high wear-resistant and environmentally friendly paint is planted on the surface.
Technical Parameters
| Nature | General data | Unit | Test Methods | |
| KT2011 | KT2012 | -------- | -------- | |
| Color | white | yellow | -------- | -------- |
| Thickness | >0.6 | >0.6 | mm | GB/T 7125 |
| Water resistance | pass | pass | -------- | GB/ T24717 |
| Acid resistance | pass | pass | -------- | GB/ T24717 |
| Wear-resistant | 40 | 40 | mg | GB/ T24717 |
| Retroreflection | 250 | 150 | mcd/m 2 /lux | GB/ T24717 |
| Minimum adhesion | 25 | 25 | N/25mm | GB/ T24717 |
| Anti-skid value | 45 | 45 | BPN | GB/ T24717 |
Instructions:
1. The road marking tape can be divided into two types: with adhesive backing and without adhesive backing. The type without adhesive backing is commonly used in special environments and with special materials, such as two-component AB glue, 502 glue, and other adhesives for bonding.
2. The products with adhesive backing can be further categorized based on their actual usage, whether to apply primer or not: Without brush primer on the ground: It can be directly applied to smooth and flat surfaces without applying primer. Brush primer on the ground: It should be applied with primer on uneven surfaces or walls (e.g., Pattex Contact Adhesive, Maxbond UL 1603HFR-HS). The amount of primer required depends on the smoothness of the bonding surface, approximately 1 kilogram per 3 to 5 square meters. Please refer to the construction instructions when using the primer.
Standard Product
Item No.: KT2001(without release paper), KT2011(with release paper)
Colour: two-colour,three-colour,four-colour, multi-colour
Pre-formed coloured floor markings can be produced in different sizes, shapes and colours.
| Product Code | Length(m) | Width(cm) | Thickness(mm) | Weight(±10%) | Conventional packaging |
| KT2001 | 60M |
5,10,15,20,40,45,100, Customizable |
0.5-0.8MM | 0.6kg/sqm | 300*300*320MM |
| KT2011 | 60M |
5,10,15,20,40,45,100, Customizable |
0.5-0.8MM | 0.6kg/sqm | 300*300*320MM |
Application scope
Used for marking lines when the road is temporarily diverted, and is a short-lived product. Directly adhered to the ground, the service life is usually 1-3 months depending on the road condition, traffic flow, and installation.
Depending on road conditions, traffic flow, and installation, the service life is usually 1-3 months.
Features
- Preformed reflective marking tape, which can be made into any specification according to customer requirements.
- The preformed material substrate is composed of polymer flexible polymer rubber, fillers, pigments, etc., and a layer of high wear-resistant environmental protection paint and anti-skid particles are planted on the surface. It has anti-fouling and anti-skid, strong wear resistance, good weather resistance, and durability. Long life, convenient and fast construction, and so on.
- Applicable to concrete, asphalt, cement, marble, and other road surfaces and walls of various materials. Widely used in railway stations, bus stations, shopping malls, hotels, hotels, hospitals, schools, playgrounds, factories, workshops, canteens, warehouses, etc.
- Capable of being made into various marking lines, arrows, words, patterns, colored marking signs on road surfaces, colored three-dimensional signs, and pipeline signs.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.