Fully automatic 4-axis dedicated palletizing robot Yaskawa MPL500 max range 3150mm payload 500KG

MPL500 is a new type of robot suitable for high-speed palletizing. Because it has a high load capacity of 500kg, it can handle heavy workloads and is very suitable for palletizing heavy items and transporting heavy materials, such as slabs and bricks. It can also be transported in large capacity at the same time, and it can be loaded in a large range without being affected. The steel bar extends above the arm of the robot, which provides stability for palletizing large items, so it is an optimized palletizing robot that can be used with special palletizing software, and it is high-speed and stable when handling and palletizing. Additionally the MPL500 offers an extended working envelope allowing palletizing of high trailer loads.

The wrist shaft of the MPL500 adopts a hollow structure to prevent interference with peripheral equipment, such as cables and pipes. And the hollow wrist design not only protects the cables, but also allows for a wider range of motion. Due to the large reduction of the arms and body of the MPL500 and the rapid movement, it can perform high-speed work, and the excessive axial speed shortens the cycle time, so the MPL500 will optimize the palletizing process.

The MPL500 is a straight arm cable configuration which makes it easy to maintain. The air pipeline and cables pass through the robot to the end tool of the manipulator internally, so the life of the cables will be extended, wear will be reduced, operation interruptions caused by cable interference will be eliminated, and its reliability will be maximized. The controller of DX100 adopts multiple robot control technologies, and a single controller of DX100 can control 8 articulated robots, achieving higher efficiency for enterprises.