LT8609EMSE#TRPBF Power Path Management IC Synchronous Step-Down Regulator with 2.5 A Quiescent Current

FEATURES

n Wide Input Voltage Range: 3.0V to 42V
n Ultralow Quiescent Current Burst Mode® Operation:

n <2.5μA IQ Regulating 12VIN to 3.3VOUT

n Output Ripple <10mVP-P
n High Efficiency 2MHz Synchronous Operation:

n >93% Efficiency at 1A, 5VOUT from 12VIN
n 3A Maximum Continuous Output
n Fast Minimum Switch-On Time: 45ns
n Adjustable and Synchronizable: 200kHz to 2.2MHz n Spread Spectrum Frequency Modulation for Low EMI n Allows Use of Small Inductors
n Low Dropout
n Peak Current Mode Operation
n Accurate 1V Enable Pin Threshold
n Internal Compensation
n Output Soft-Start and Tracking
n Small 10-Lead or 16-Lead MSOP Package

APPLICATIONS

n GSM Transceivers
n General Purpose Step-Down
n Low EMI Step-Down

DESCRIPTION

The LT®8609/LT8609A/LT8609B is a compact, high effi- ciency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7μA of non- switching quiescent current. The LT8609/LT8609A/ LT8609B can deliver 3A of continuous current. Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock, or spread spectrum modulation for low EMI operation. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN UVLO or to shut down the part. A capacitor on the TR/SS pin programs the output voltage ramp rate during start-up while the PG flag signals when VOUT is within ±8.5% of the programmed output voltage as well as fault conditions. The LT8609A has slower switch edges for lower EMI emissions. The LT8609B operates in pulse-skipping mode only.