ChongMing Group (HK) Int'l Co., Ltd
                                                                                                           
Verified Supplier
18 Years
Since 2008
Menu

TPS2511DGNR Ethernet Switch IC Power Distribution Charging Port Cntrlr & Crnt Ltd Pwr Sw

Price Negotiable
Price: Negotiable
MOQ: Negotiable
Delivery Time: Negotiable
Brand: Ti
Product Description

TPS2511DGNR Ethernet Switch IC Power Distribution Charging Port Cntrlr & Crnt Ltd Pwr Sw

 

1 Features

  • Supports a USB DCP Shorting D+ Line to D– Line
  • Supports a USB DCP Applying 2 V on D+ Line and 2.7 V on D– Line (or a USB DCP Applying 2.7 V on D+ Line and 2 V on D– Line)

  • Supports a USB DCP Applying 1.2 V on D+ and D– Lines

  • Automatically Switch D+ and D– Lines Connections for an Attached Device

  • Hiccup Mode for Output Short-Circuit Protection

  • Provides CS Pin for USB Cable Compensation

  • Programmable Current Limit (ILIM_SET Pin)

  • Accurate ±10% Current Limit at 2.3 A (Typical)

  • 70-mΩ (Typical) High-Side MOSFET

  • Compatible With USB 2.0 and 3.0 Power Switch Requirements

  • Operating Range: 4.5 V to 5.5 V

  • Available in 8-Pin MSOP-PowerPADTM Package

     

2 Applications

  • Vehicle USB Power Chargers

  • AC-DC Wall Adapter With USB Ports

  • Other USB Chargers

 

3 Description

The TPS2511 device is a USB-dedicated charging port (DCP) controller and current-limiting power switch. An auto-detect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:

  1. Divider DCP, required to apply 2.7 V and 2 V on the D+ and D– lines respectively or 2 V and 2.7 V on the D+ and D– lines respectively

  2. BC1.2 DCP, required to short the D+ line to the D– line

  3. 1.2VonbothD+andD–lines

The TPS2511 is a 70-mΩ power-distribution switch intended for applications where heavy capacitive loads and short circuits are likely to be encountered. This device also provides hiccup mode when the output (OUT) voltage is less than 3.8 V (typical) or when an overtemperature protection occurs during an overload condition. Accurate and programmable current limit provides flexibility and convenience for applications. The TPS2511 provides a CS pin for USB cable resistance compensation and an EN pin to control the device turnon and turnoff.

Device Information

PART NUMBER PACKAGE BODY SIZE (NOM)
TPS2511 MSOP-PowerPAD (8) 3.00 mm × 3.00 mm

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company ChongMing Group (HK) Int'l Co., Ltd
Location Room 1204, DingCheng International Building, 518028 Futian District, SHENZHEN, CN
Contact Person Doris Guo

Request A Quote

Please check your email address.
Your message must be at least 20 characters.