• Low Power Consumption (ICC = 3 μA Max)

• Bidirectional Data Flow With Near-Zero Propagation Delay

• Low ON-State Resistance (ron = 3 Ω Typ)

• VCC Operating Range From 4.5 V to 5.5 V

• Ioff Supports Partial-Power-Down Mode Operation

• Data and Control Inputs Provide Undershoot Clamp Diode

• Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs

DESCRIPTION/ORDERING INFORMATION

The TS5V330 video switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (EN) input. When EN is low, the switch is enabled and the D port is connected to the S port. When EN is high, the switch is disabled and the high-impedance state exists between the D and S ports. The select (IN) input controls the data path of the multiplexer/demultiplexer.

Low differential gain and phase make this switch ideal for composite and RGB video applications. This device has wide bandwidth and low crosstalk, making it suitable for high-frequency applications as well.

This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. This switch maintains isolation during power off.