P6KE15A Rectifier Diode Transient Voltage Suppressor Diodes
Stock Offer (Hot Sell)
| Part No. | Quantity | Brand | D/C | Package |
| PIC18F26K80-I/SO | 5403 | MICROCHIP | 16+ | SOP-28 |
| PIC18F4550-I/PT | 4333 | MICROCHIP | 14+ | QFP44 |
| PIC18F458-I/PT | 3401 | MICROCHIP | 16+ | QFP44 |
| PIC18F45K20-I/PT | 5471 | MICROCHIP | 13+ | QFP44 |
| PIC18F45K80-I/PT | 8243 | MICROCHIP | 13+ | TQFP-44 |
| PIC18F4620-I/PT | 2841 | MICROCHIP | 14+ | TQFP-44 |
| PIC18F4685-I/P | 3005 | MICROCHIP | 13+ | QFP44 |
| PIC18F46K20-I/PT | 5242 | MICROCHIP | 15+ | QFP44 |
| PIC18F46K22-I/PT | 2422 | MICROCHIP | 15+ | TQFP-44 |
| PIC18F46K80-I/PT | 7746 | MICROCHIP | 15+ | TQFP-44 |
| PIC18F6722-I/PT | 3380 | MICROCHIP | 10+ | QFP64 |
| PIC18F67K22-I/PT | 2275 | MICROCHIP | 12+ | QFP64 |
| PIC18F87J10-I/PT | 3451 | MICROCHIP | 12+ | TQFP-80 |
| PIC18F87J50-I/PT | 3690 | MICROCHIP | 13+ | TQFP-80 |
| PIC18F97J60-I/PF | 2840 | MICROCHIP | 16+ | QFP100 |
| PIC18F97J60-I/PT | 5330 | MICROCHIP | 16+ | QFP100 |
| PIC18LF4520-I/PT | 5474 | MICROCHIP | 16+ | QFP44 |
| PIC24FJ256GA106-I/PT | 8489 | MICROCHIP | 14+ | QFP64 |
| PIC24FJ256GB110-I/PF | 4615 | MICROCHIP | 16+ | QFP100 |
| PIC24HJ128GP506-I/PT | 1763 | MICROCHIP | 16+ | QFP64 |
| PIC24HJ256GP610A-I/PF | 4766 | MICROCHIP | 13+ | TQFP100 |
| PIC24HJ64GP506-I/PT | 4917 | MICROCHIP | 12+ | QFP64 |
| PIC32MX795F512L-80I/PF | 1586 | MICROCHIP | 15+ | TQFP100 |
| PIC32MX795F512L-80I/PT | 2611 | MICROCHIP | 15+ | TQFP100 |
| PKF4310PI | 2416 | ERICSSON | 16+ | MODULE |
| PKLCS1212E4001-R1 | 16023 | MURATA | 13+ | SMD |
| PKM13EPYH4000-AO | 6233 | MURATA | 10+ | SMD |
| PL2303SA | 12112 | PROLIFIC | 15+ | SOP-8 |
| PLVA650A | 149000 | 14+ | SOT-23 | |
| PM20CEE060-5 | 2962 | MITSUBISH | 16+ | MODULE |
P6KE SERIES
600 Watts Transient Voltage Suppressor Diodes
Features
- UL Recognized File # E-96005
- Plastic package has Underwriters Laboratory Flammability Classification 94V-0
- Exceeds environmental standards of MIL-STD-19500
- 600W surge capability at 10 x 100 us waveform, duty cycle: 0.01%
- Excellent clamping capability
- Low zener impedance
- Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional
- Typical IR less than 1uA above 10V
- High temperature soldering guaranteed: 260℃ / 10 seconds / .375”,(9.5mm) lead leCM GROUPh / 5lbs.,(2.3kg) tension
Mechanical Data
- Case: Molded plastic
- Lead: Pure tin plated lead free,, solderable per MIL-STD-202, Method 208
- Polarity: Color band denotes cathode except bipolar
- Weight: 0.42gram
Maximum Ratings and Electrical Characteristics
Rating at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
| Type Number | Symbol | Value | Units |
| Peak Power Dissipation at TA=25℃, Tp=1ms (Note 1) | PPK | Minimum 600 | Watts |
|
Steady State Power Dissipation at TL=75 ℃ Lead LeCM GROUPhs .375”, 9.5mm (Note 2) |
PD | 5.0 | Watts |
|
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) |
IFSM | 100 | Amps |
| Maximum Instantaneous Forward Voltage at 50.0A for Unidirectional Only (Note 4) | VF | 3.5 / 5.0 | Volts |
| Operating and Storage Temperature Range | TJ, TSTG | -55 to + 175 | ℃ |
Notes:
1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25o C Per Fig. 2.
2. Mounted on Copper Pad Area of 1.6 x 1.6” (40 x 40 mm) Per Fig. 4.
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minutes Maximum.
4. VF=3.5V for Devices of VBR ≤ 200V and VF=5.0V Max. for Devices of VBR>200V.
Devices for Bipolar Applications
1. For Bidirectional Use C or CA Suffix for Types P6KE6.8 through Types P6KE400.
2. Electrical Characteristics Apply in Both Directions.
DO-15
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.