BNX016-01 Mosfet Power Module SMD / BLOCK Type EMI Suppression Filters IC Chip Module

● Rating        

Do not use products beyond the rated current and rated  voltage as this may create excessive

heat and  deteriorate the insulation resistance.                                                             

● Storage and Operating Conditions

<Operating Environment>

Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas.

Do not use products in the environment close to the organic solvent.

<Storage and Handling Requirements>

1. Storage Period

    BNX series should be used within 12 months.

    Solderability should be checked if this period is  exceeded.

2. Storage Conditions                                                   

(1) Storage temperature: -10 to +40˚C                                                   

      Relative humidity: 15 to 85%  Avoid sudden changes in temperature and humidity.                   

(2) Do not store products in a chemical atmosphere  such as chlorine gas, acid or sulfide gas.

● Notice (Soldering and Mounting)

1. Cleaning

    Do not clean BNX series (SMD Type).

    Before cleaning, please contact Murata engineering.

2. Soldering

    Reliability decreases with improper soldering methods.

    Please solder by the standard soldering conditions shown in mounting information.

3. Other

    Noise suppression levels resulting from Murata's EMI  suppression filters EMIFILr

    may vary, depending on  the circuits and ICs used, type of noise, mounting

    pattern, mounting location, and other operating conditions. Be sure to check and

    confirm in advance the noise suppression effect of each filter, in actual

    circuits, etc. before applying the filter in a commercial-purpose equipment design.

■ Insertion Loss Characteristics