Weaving Looms Warp Stop Motion Device For Air Jet Loom Spare Parts

Texile machine weaving looms spare part warp break stop motion device for air jet loom

Texile machine weaving looms spare part warp stop motion device for air jet loom

Contact us:

Mob/ Wsap +86 15253270037

E-mail: topbright@yeah.net

Qingdao Qingtai is leading manufacturer of textile machine spare parts, products include cross beam, cloth roller, take up roller, loom panel, reed guard, shaft, warp stop motion decive, motor bracket, let off gearbox, take-up gear box, auxiliary spray electromagnetic valve seat and clip, waste selvage frame, weft frame stand, reed base and brace, selvedge assembly, roller covering tape, warp beam, the electronic components, etc.

The principle of operation of a warp stop-motion is as follows. A metal vane is fitted on each warp thread. Above the hole for the thread in the vanes there is a longitudinal slot through which two racks pass. The outer rack is fixed, and the inner is movable. The inner rack performs reciprocating motion inside the fixed rack. If a thread breaks, the vane drops and, by falling between the teeth of the racks, stops the motion of the movable rack which causes the loom to shut down. Warp stop-motions also exist that operate electromagnetically; in this case the fall of a vane when a warp thread breaks closes an electrical circuit and stops the loom. These mechanisms free the weaver from the need to watch for warp breakages, which is important when operating several automatic machines simultaneously, and prevent the occurrence of defects in the fabric.