230V RHF-N-JK-G-Y-6 Antenna Lightning Arrester Electroplated Gold

Descriptions:

RisingHF Antenna lightning arrester, DC~5.9GHz, loss<0.4dB RHF-N-JK-G-Y-6

The product has realized the installation of N-type pin and socket lightning arrester through the wall.

During docking, it is necessary to align first and then tighten with a torque wrench, Materials meet RoHS requirements.

Packaging:

One plastic bag unit is packaged and then placed in a paper box.

Place a certificate of conformity inside the box, and comply with environmental requirements. Attach an  environmental label outside the box.

Outer packaging is corrugated cardboard box.

Storage conditions:

Store in a warehouse with a temperature of - 10~+35 ℃, a relative humidity of not more than 80%, and no corrosive gases such as acid and alkali in the surrounding air.

Specification:

Product design level:  Universal connector level 2

Connection mechanism type: threaded connection 5/8-24UNEF-2A (2B)

Applicable standards: IEC60169-1, IEC-60169-16

Matching relationship: can be matched with N-type pin and socket contact connectors

Technical parameters:

A. Materials and surface treatment

Inner conductor: material: bronze/brass QSn6.5-0.1/HPb59-1 GB3124-82/GB3112-82

Rated DC breakdown voltage: 230V ± 20%

Contact resistance: inner conductor: ≤ 1m Ω; Outer conductor ≤ 1m Ω

Insulation resistance: ≥ 5000 M Ω

Dielectric withstand voltage: 2500V

Voltage standing wave ratio<1.2

Insertion loss:<0.4dB

Mechanical characteristics:

Inner conductor separation force:>0.57N

Outer conductor separation force: Not applicable

Mechanical life:>500 times (12 times per minute)

Connecting nut torque: 0.68~1.13N. m recommended

Installation mode: through-wall installation

Working environment:

Ambient temperature: - 40~85 ℃

Relative humidity: up to 95% at+40 ℃

Waterproof requirements: meet

attached Picture

For more information, pls access to our website www.risinghf.com.