Durable Wear Resistant Steel Lobe Pump , Anticorrosive Rotary Displacement Pump
Longer Life Time And Wear-Resistant Steel Rotary Lobe Pump
The Working principle of ACCUVON Rotary Lobe
1. The volume at the inlet increases when the rotors rotate, and the product is aspirated into the pump
2. The liquid is transported between rotor and casing (chamber) through the pump
3. The volume is reduced between the rotors and the product is forced out through the outlet
The Components of the ACCUVON Rotary Lobe Pump
1. Bearing and timing gear
2. Intermediate chamber
3. Casing in Block design
4. Axial and radial casing liners
5. Shaft seals
6. Rotary Lobes
7. Quick-release-cover
8. Non-wetted shafts
Specifications:
| Description | Rotary Lobe Pumps |
| Rotor | Hardened steel / Rubber / NBR |
| Seal | Flame proof motors Sealing Flush / mechanical seal |
| Axial and radial casing protection | Wear-resistant steel / Hardened steel / Stainless steel / SIC |
| Drive | Variable geared motor |
| Material of pump | Gray cast iron |
| Gear | Helical geared motor / Manual adjustable speed motor |
| Flow | 0.6-400 m³/h |
| Custom printing | Acceptable |
Parameter of AP 100
| Drive | Weight | Dimensions | |
| KW | KG | L / mm | H / mm |
| 3 | 204 | 1268 | 394 |
| 4 | 216 | 1288 | 419 |
| 5.5 | 237 | 1368 | 454 |
| 7.5 | 250 | 1408 | 454 |
| 11 | 305 | 1498 | 509 |
| 15 | 368 | 1498 | 509 |
Design 1 | Short, s traight pipe connectors with connection flange and gasket, in mm / inches approx.
| AP 100 | DN 80 / mm | DN 100 / mm | DN 125 / mm | DN 150 / mm | DN 200 / mm |
| DIN 2633 | 146/550 | 146/550 | 176/610 | 181/620 | 251/760 |
| ANSI 150 | 161/580 | 170/598 | 210/678 | 236/730 |
Advantages
- Low shear / Sensitive handling and conveying of products
Rotary-lobe-pumps are well known in applications where a low shear is required.
The reasons are :
- The low speed of the pumps,
- The little friction through the rotating elements
- Large chambers inside of the pumps
- Quick flow through the pump
- Service-life of the wearing parts
High service life as the conveying elements are guided without friction on eachother. Wear is only produced by the fluid and the contained solids
- Blockage - free
Good for positive displacement pumps, as ball-entering diameters are relatively large up to 16 cm. No danger of sedimentation. Even when handling heavy solids suspensions, as all casings-areas are continuously cleaned by the conveying elements.
FAQ:
Q: How can I make order online?
A: Email or WhatsApp / Wechat , .you can ask any question ,after we confirm the detail, we can make order.
Q: Do you have MOQ limit?
A: The MOQ is 1 set.
Q: Which payments are acceptable?
A: T/T, L/C, Western Union, Paypal
Q: Which shipping terms are available?
A: By sea, air, Express
Q: How about the delivery time?
A: Delivery time is normally 3-7 working days after confirm the money. Depends on your quantity.
Q: What guarantee do you have?
A: The product warranty period is 2 years, except for wearing parts (if the product fails to work normally due to poor manufacturing, the company will replace and repair products and parts for users free of charge. Product damage caused by human causes is not covered by the warranty).
Q: Can I purchase parts separately?
A: Yes, all pump spare parts can be purchased separately.
Photo Display
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.