Solids Resistant Rotary Lobe Pump Reversible Pulsation Free Durable
Rotary Lobe Pumps / Solids-Resistant / Self-Priming / Pulsation-Free
Accuvon is a specialist in rotary lobe pumps. We offer solids-resistant rotary lobe pumps with flow rates of 1 – 4,000 m³/h and a large selection of equipment and additional parts. The pumps can be used as mobile, stationary or submerged versions.
OPERATING PRINCIPLE
Accuvon rotary lobe pumps are self-priming, valveless, positive displacement pumps. The synchronized rotation of the rotor pair creates a vacuum on the priming side of the pump. This vacuum draws the liquid into the pump chamber. The medium is pumped into the pressure area due to the rotation of the rotors. If the direction of rotation is changed, the flow is reversed.
CONSTRUCTION
1 . The quick-release cover
Access to all wetted parts by simply loosening four ring nuts.
2 . The rotors
Large selection of high-quality rotors for almost pulsation-free pumping of the medium.
3 . The casing protection
The casing liners and casing protection plates protect the pump casing from wear and can be replaced in a matter of minutes.
4 . The intermediate chamber and shaft seal
The large-volume quench chamber is oil-filled and ensures the highest degree of safety.
The ideal mechanical seal is selected depending on the medium.
5 . The carrier and timing gear
The high-quality and maintenance-free carrier and timing gear guarantees a smooth and even operation of the rotors. The result is a long service life of the pump
ROTARY LOBE PUMPS AT A GLANCE
+ 16 pump sizes with flow rates of 1 – 4,000 m³/h
+ Pumping in slurp operation
+ Resistant to solids and self-priming
+ Ease of maintenance
+ Different drive options
+ Short-term dry-run capability
Performance data
| accuvon | rate of flow l/rev |
flow (m³/h) |
pressure (Mpa) |
speed rpm |
Flange diameter DN mm |
power Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Features of Accuvon Rotary Lobe Pumps:
1.Self-priming, Valve-less, Positive Displacement Pump
2. Easy Maintenance through Front Cover
3. Controllable Flow, Ratio up to 1 : 5
4. Capacity of up to 4000 m³/h
5.Pressures of up to 25 bar
6. Dry-running Capability
7.Reversibility, same pump output for both directions
8. Gentle, Low-Pulsation Pumping
9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums
10. Low Parts Replacement Costs
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.