0.6 Mpa Mechanical Rubber Lobe Pump Multipurpose With Double Seal
Transfer Sensitive Medium Double-Acting Mechanical Seal Lobe Pump
Product Overview
ACCUVON Rubber Rotary Lobe pump are high self-priming up to 9.5m. it adopts two synchronous rotors. The rotor is driven by a pair of synchronous gears in the tank. The rotor is rotated in the opposite direction by the main and auxiliary shafts, which causes the volume of the pump to change, thus forming a high Vacuum and discharge pressure, especially suitable for the delivery of hygienic media and corrosive high viscosity media.
Specifications:
| ACCUVON | rate of flow l/rev | flow (m³/h) | pressure (Mpa) | speed rpm | Flange diameter DN mm | power Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements
Function
- Rotor
Lobe pump manufacture use high precision 5-axis CNC machining. Our rotor perfectly seal with the inlets and outlets chamber, pump suction ability can reach to 9 meters. The material of the rotor can be selected according to the characteristics of conveying medium. We have many kinds of rotor material for selection, including anti-wear elastomers, hard steel, stainless steel and etc.
- Space Occupied
Our lobe pumps design is compact, can be installed in extremely limited space. The design of flange and placement of the motor can be adjusted to fit for the customer's space constraints.
- Pump Body
Pump body choose inblock casting, the error is minimal. Body material can be cast iron and stainless steel. Chamber inside have replaceable protective liner. The liner surface can be hardened to increase wear resistance.
- Simple Maintenance
Our lobe pump is unilateral shaft support design, fluid chamber can be quickly disassemble. Rotors and other accessories can be replaced in a few minutes without remove the pump inlet and outlet pipes. Also lobe pump have few wearing parts, it make lobe pump lower shutdown time and lower using cost.
- Operating Efficiency
Very high efficiency, about 60% to 85%.
- The Particles Size
Lobe pump have wide fluid chamber, no block problem.
- Self-priming and Dry Running
Lobe pump have good self-priming ability, reach to 9.5m, and can allow a certain time dry running.
Advantage
• Low shear/Pulse free operation
• Excellent for oil/water and high viscosity liquid.
• Ability to pump at constant pressure at different flow rates
• Self-priming to 8 meters
• Forward and reverse pumping operation
• Space-saving compact design
• 10 to 1 turn down capability and reverse capability
• Run dry ability for a period of time
Structure features
Quality inspection photos
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.