10-600 Rpm Torque Rubber Lobe Pump Low Starting Carbon Steel Material
Low Starting Torque Rubber Lobe Pump With Various Rotor Options
ACCUVON Rotary Lobe Pump
Rotary Lobe Pumps are self-priming, valve less, positive displacement pumps. With speed-proportional flow, they continuously deliver trouble-free pumping of liquids of various consistencies and multiphase mixtures. They are compact and operate with low shear and low pulsation.
Specifications:
| ACCUVON | rate of flow l/rev |
flow (m³/h) |
pressure (Mpa) |
speed rpm |
Flange diameter DN mm |
power Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements
Technical Detail
| Model | AP 140 |
| Rotor | Rubber rotor |
| Seal | Double mechanical seal |
| Axial and radial casing protection | High-strength steel , resistant to wear |
| Drive | Electric Motor,diesel engine, hydro turbine, hydraulic motor |
| Material of pump | Cast Iron,Stainless steel |
| Pressure | 0-0.6 mpa |
| Flow | 2.2-133 m³/h |
| Power | 7.5-22 / KW |
| Speed | 10-600 rpm |
| Work efficiency | Up to 85% |
| Rate of flow |
3.714 l/rev |
| Self - priming | Up to 9.5m vertical / 30m horizontal |
| Medium | High-corrosive / high-viscous |
Design and Materials:
- Pump casing: one-piece Block casing with protective liner plates at both faces.
- Bearings: one side double bearings, oil bath in block-casing, lateral drain plug
- Rotors: entirely NBR - coated, core not product wetted
- Rotor-form: dual lobe rotors, entirely elastomer coated
- Shafts: not wetted by pumped fluid, but oil lubricated Shaft
- Sealing: maintenance free single acting mechanical seals with common oil quench, seal faces SISIC / SISIC; Seals easily replaceable through pump casing.
- Seal monitoring: oil-filled intermediate chamber, integrated in the pump casing, with lateral drain plug, as Quench, for seal monitoring and for lubricating the shaft-rotor-connection, without external fluid reservoir, without pressurization.
- Pump: 2-component-PUR-coat
- Drive: Manufacturers standard
- Maintenance: MIP™, Maintenance in Place, through quick release cover opening, with 4 rings nuts and O-ring-seal, without disassembling the pump and/or pipes.
Rotor types
Different forms of rotor design meets the diverse needs of users, and the materials of the rotor are also diverse, such as NBR rubber, EPDM rubber, FPM rubber, FFKM rubber, PU, Stainless steel, copper, PTFE, etc.
Advantages
- Suction Property
Good suction property, but depended from the pump speed.
Easier installation of pump-systems, through the suction property
- Various Rotors Available
Stainless steel rotors are available for all pumps, and some models offer rotors from PTFE.
- Starting Torque
Starting Torque Low, as all rotating elements are guided in anti-friction bearings. Star-Delta-Start is possible with three-phase-motors.
Quality inspection photos
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.