Replace BöRger Rotary Lobe Pump PL 200 For Primary Sludge
Replace BöRger Rotary Lobe Pump PL 200 For Primary Sludge
Product Description:
Rotary lobe pumps are positive displacement pumps. The rotation of the lobes creates a vacuum on the suction side, which draws in the pumped medium. The lobes drive the medium along the pump wall into the pressure area. Two to six room fillings are displaced with one drive rotation, depending on the number of rotor blades. This also allows you to dose in proportion to the speed. When the pump is at a standstill, rubber-coated rotors seal off the flow almost entirely and thus ensure that the rotary lobe pump functions smoothly. Lobes without rubber linings, on the other hand, are undersized to reduce friction, so a complete seal is not possible. The design of the pump also makes it insensitive to dry running and allows you to have fully functional pumping regardless of the direction of rotation.
Technical Date:
| Product Name: | |
| Description: | Designed according to 3A standard, Suitable for conveying high viscosity medium, containing solid particles liquid, high abrasiveness liquid,Shear-sensitive medium, gas-liquid mixure, and fluids with quantitative feeding. |
| Material: | GGG25 Pump housing, |
| Seal Material: | SIC/NBR |
| Max. Flow: | 8 m3/h |
| Max.pressure: | 10bar |
| Speed | 25~650 RPM |
| Rotor Type: | Tri lobe rotors |
| Mechanical seal: | Single acting mechanical seal |
| Motor power: | 1.1KW~5.5KW |
| Sealing option: | Sanitary single mechanical seal/Double mechanical seal with cooling system |
| Voltage: | 220V, 380V(110-480v) |
| Motor: | XINGLING motor, WANNAN motor, others (Domestic Famous Brand) |
| connection: | Clamp, Thread, weld, Flange |
| Available standard: | DIN, SMS, 3A, RJT, ISO/IDF |
| Operated: | Electric power |
| Application scope: | Petrochemical,Lithium battery,MBR treatment,sludge treatment,etc. |
Specifications:
| ACCUVON | rate of flow l/rev | flow (m³/h) | pressure (Mpa) | speed rpm | Flange diameter DN mm | power Kw |
| AC25 | 0.196 | 0.1-7 | 0-1.2 | 10-600 | DN25 | 0.75-5.5 |
| AC50 | 0.392 | 0.2-14 | 0-1.0 | 10-600 | DN50 | 1.1-5.5 |
| AC75 | 0.588 | 0.3-21 | 0-0.6 | 10-600 | DN50 | 1.1-5.5 |
| AP80 | 1.125 | 0.6-400 | 0-1.8 | 10-600 | DN80 | 3-22 |
| AP100 | 1.875 | 1.1-66 | 0-1.4 | 10-600 | DN100 | 3-22 |
| AP120 | 2.864 | 1.7-103 | 0-1.0 | 10-600 | DN100 | 3-22 |
| AP140 | 3.714 | 2.2-133 | 0-0.6 | 10-600 | DN125 | 7.5-22 |
| AF125 | 4.566 | 2.7-164 | 0-1.6 | 10-600 | DN125 | 11-55 |
| AF150 | 6.828 | 4-246 | 0-1.2 | 10-600 | DN150 | 11-55 |
| AF200 | 9.456 | 5.5-340 | 0-0.8 | 10-600 | DN200 | 11-55 |
| AX250 | 12.5 | 7.5-487 | 0-2.5 | 10-650 | DN250 | 22-315 |
| AX300 | 25 | 15-975 | 0-1.0 | 10-650 | DN300 | 30-315 |
| AX350 | 37.5 | 22.5-1463 | 0-0.6 | 10-650 | DN350 | 45-315 |
| AX450 | 50 | 30-1950 | 0-0.4 | 10-650 | DN450 | 55-315 |
| AX350D | 75 | 45-2926 | 0-0.6 | 10-650 | DN350*2 | 90-450 |
| AX450D | 100 | 60-3900 | 0-0.4 | 10-650 | DN450*2 | 110-600 |
Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements
Function
Due to the unique separation between the pump and gear chamber, the ACCUVON lobe pump offer you maximum operational safety. This means that no penetration of the medium into the bearing housing is possible in the case of a product leak. In addition, the innovative design allows you to inspect the mechanical seals visually. This enables you to react at an early stage if necessary. Thanks to the function of the rotary lobe pumps, you can also safely convey both low and high viscosity media. Due to the significant free ball passage and the low speeds, the positive displacement pumps are insensitive to blockages, clogging and foreign bodies. Varying solids contents have just as little influence on the flow rate as pressure changes. This enables continuous and powerful pumping.
Testing Photo
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.