Wearable Farming Sewage Lifting Lobe Pump With Convenient Maintenance

Rotary lobe pumps

Accuvon is a specialist in rotary lobe pumps. We offer solids-resistant rotary lobe pumps with flow rates of 1–24,000 l/min and a large selection of equipment and additional parts. The pumps can be used as mobile, stationary or submerged versions.

Specifications:

Unrivaled Low Maintenance

Due to the cantilevered carrier design of the pump, the wear parts stressed by the pumped media can be replaced through the quick-release cover of the pump. All maintenance work can be done without the need to remove piping and the drive system.

Outstanding Range Of Material

The correct selection of material is important for the durability of a pump. For this reason, all components of our pumps are available in different materials. Using a modular principle, the most resistant material most suitable for the relevant pumped medium is selected for each pump component, from the O-ring to the pump casing.

Unique Block Design

Each rotary lobe pump is equipped with a non-segmented pump and gear casing. This design reflects our high quality standard and guarantees long service life with ease of maintenance. The pump casing can be manufactured in cast iron, cast steel, stainless steel, duplex steel or Hastelloy.

Variety Of Rotors

We offer a range of linear and screw rotors differentiated by geometry and material. Whether made of NBR, EPDM, FKM, stainless steel, steel or another material, we offer a suitable rotor for your application.

Seal Selection

Our single- or double-acting mechanical seals are available in different versions and materials. The seals can be replaced very easily through the quick-release cover.

Unique Casing Protection

In order to prevent pump casing damage, e.g. due to abrasive or aggressive fluids, Accuvon pumps are equipped with casing protection. The unique casing liners and casing protection plates are available in different materials.

Advantages

• Compact construction,high performance in a compact design,taking less area than normal screw pump does (2/3~1/4 of which only)
• Convenient Maintenance in Place ,reduce the time of maintenance and downtime.No need to disassemble the piping or lift machine.. Replacement of wear parts in the blink of an eye, in-situ by service personnel.
• Smooth pumping action.
• Large bucket geometry and short passage through the pump provide a smooth transfer of the pumped fluid.
• Can be used for delivery mixing gas,liquid,particle , big lumps,fiber, hair, and never be blocked.
• Pump works in unrestricted reversible.
• High capacity of self-priming,maximum at 9.5 meters.
• With a Has a separated sealing cavity,keeping wet, which makes short time running idle available when lacking medium.
• Suitable for transfer different medium, casing and rotor can be customized according to client’s request.

Testing Photo