10 Port POE Ethernet Switch ZC-S2010P 8 PoE Ports Switching Capacity 20G DC Or AC
ZC-2010P PoE Switch 8 PoE Ports Switching capacity 20G DC or AC
To fulfill the demand of High Power PoE for network applications with Gigabit transmission, PSE ZC-S2010P PoE Gigabit Ethernet Switch is an ideal solution. Each 10/100/1000Mbps port of the ZC-S2010P features IEEE 802.3af and IEEE 802.3at Power over Ethernet (PoE) that combine up to 120-watt PoE budget on the whole system. All RJ45 copper interfaces of the ZC-S2010P support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. 2 extra gigabit RJ45 for uplink.
Typical applications please refer to following picture
Features
. Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T
. 8-Port 10/100/1000Mbps supports 52V DC power to PoE Powered Device
. 2-Port 10/100/1000Mbps RJ45 interface for uplink
. Complies with IEEE 802.3af/802.3at Power over Ethernet End-Span PSE
. Up to 8 IEEE 802.3af devices powered
. Supports PoE Power up to 15.4 watts for each PoE port
. Up to 4 IEEE 802.3at devices powered
. Supports PoE Power up to 30 watts for each PoE port
. 120-watt PoE budget
. Auto detects powered device (PD)
. Circuit protection prevents power interference between ports
. Remote power feeding up to 100m
. Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
. Features Store-and-Forward mode with wire-speed filtering and forwarding rates
. IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
. Integrates address look-up engine, supporting 8K absolute MAC addresses
. 2M packet buffer
. 10K Jumbo frame supports at 1000Mbps duplex mode
. Automatic address learning and address aging
. Made of metal, desktop size and wall-mount design
Technical Specifications
| Item | Description | |
| Model | ZC-S2010P | |
|
Power Supply |
Voltage Range | AC 100-240V |
|
Power Consumption |
The device <5W, POE power supply <120W |
|
|
Network Port Parameter |
Network Ports |
1～8 Ports: 10/100/1000Mbps Ethernet port, adaptive control 2-Port 10/100/1000Mbps RJ45 interface for uplink |
| Transmission Distance | 1~10 Ethernet Port:0~100m | |
| Transmission Media | 1~10 Ethernet Port:Cat5e/6 standard UTP cable | |
| POE Agreement | IEEE802.3 af/at standards | |
| PoE Power Supply Mode | End-span method | |
| PoE Power Supply Wattage | Each port≤30W,Whole device<120W | |
|
Network Switch Specification |
Network Standard | IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T |
| Swap Mode | Store-and- forward | |
| Switch Capacity | 20Gbps | |
| MAC Address List | 8K | |
|
Status Indicators |
Power Indicator Light | One power light (green) |
| PoE Indicator | 1~8 PoE indicator light(yellow) | |
|
Network Port LED |
1~10 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data |
|
|
Protection Level |
Surge Immunity | Level 3, executive standard:IEC61000-4-5 |
|
Electrostatic Protection |
1a touch electric discharge: level 3 1a Air discharge: level 3 Executive standard:IEC61000-4-2 |
|
|
Operating Environment |
Working Temperature |
-10℃~55℃ |
|
Storage Temperature |
-40℃-85℃ | |
|
Humidity(non-cong eal) |
0~95% | |
|
Mechanical Attributes |
Dimensions (L*W*H) |
202mmx140mmx44mm |
| Color | Black | |
| Weight | 1.2kg | |
| Reliability | Mean time | >50000h |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.