Pafc Cas 55295-98-2 20% - 80% Lower Than Other Inorganic Flocculants Solution Waste Water Treatment Chemical

Product Description
Industrial chemicals PAFC:
1, Good quality and reasonable price
2, Spray dried
3, SGS, BV, CIQ inspection welcoming
Manufacturer of high purity polyaluminium chloride chemicals for industrial wastewater treatment.

Physical characteristics:
Pale, brown, hydroscopic powder. Bulk Density: 0.65 g/cm3
The product is high-efficient, cheap and nontoxic inorganic high molecular compound. The liquid is colorless or light yellow and transparent; The solid is light yellow powder. It is easily soluble in water.
In the hydrolytic process, it is accompanied with the chemical processes such as electrochemistry, coagulation, absorption and precipitation. The product has the features including

Wide applicable range of PH value, large granule, and quick speed in sedimentation. It is widely applied for treating the domestic drinking water, domestic sewage and industrial waste water.
1. Poly aluminium ferric chloride (PFAC)
2. Spray type are available
3. Factory of PAFC
4. Water treatment PAFC

Polyaluminium Ferric Chloride
Index Item	Index
	Solution	Solid
AL2O3 Content/% ≥	8.0	28.0
Total Ferric(Fe) Content/%	1.5-5.0
Ferrous Ferric(Fe) Content/% ≤	0.2
Basicity/%	20.0-85.0
Density(20℃)/(g/cm³) ≥	1.19	——
Water Insolubles/% ≤	0.5
pH(1% Water Solution)	3.5-5.0
Arsenic(As) Content/% ≤	0.0005
Lead(Pb) Content/% ≤	0.002
Cadmium(Cd) Content/% ≤	0.0002
Hydrargyrum(Hg) Content/% ≤	0.00002
Chromium(Cr) Content/% ≤	0.005
Zinc(Zn)Content/% ≤	0.02
Nickel(Ni) Content/% ≤	0.001
We can produce according to the indicators provided by the clients who have special requirements for quality.

Product Features

1. The cost of water production is 20% - 80% lower than that of other inorganic flocculants.

2. It can quickly form flocs, and the alum ratio is large, and the formed alum is close.

3. It can adapt to the source water at various temperatures and has good solubility.

4. The solution is suitable for automatic dosing, with small corrosion, easy operation, and long-term use without pipe plugging.

Packaging And Storage

1. This product cannot be mixed with other chemicals.

2. The PAFC solution will be transported by our company’s tank cars,special IBC ton barrels and phialum.The PAFC solid is packed in 25kg bags, with inner plastic films and outer plastic woven bags.

3. The storage period of our products is one year.

Company Profile

00:00

 

00:38

 

Lanyao was established since early 1990s,in the start-up stage, as a watertreatment chemicals distributor, we provided product sales and technical supports for various regional sewage plants in East China. Since Eastern China has always been a concentrated area for the development of light and heavy industries in the early 20th century, the water qualities of sewage plants in various regions are relatively different and complicated so that the treatment is relatively difficult. Therefore, we usually send technicians to the site and conduct micro-experiments based on detection report on COD,BOD,SS,ammonia nitrogen,total phosphorus,heavy metal and other impurities.As that we can match the appropriate type of chemicals to obtain the best treatment effect. Until 2006, according to nearly ten years of technology accumulation and research on various types of chemicals, cooperating with experts and professors from various colleges and universities, Lanyao manufacturing-type enterprise was settled in yixing, jiangsu province. Lanyao produces a wide range of chemicals used in water treatment processes, including coagulants, flocculants, PH adjusters such as polyaluminium chloride, poly ferric sulphate, sodium acetate and polyaluminium ferric chloride, etc. The company is now located in the Chemical Industry Zone in Jiangsu Province, with a factory area of 17,000 square meters and 108 employees. We have a complete set of production management and quality control systems. We got the ISO9001 quality system certification in 2012, the ISO14001 environmental system certification in 2014, and the occupational health and safety management system certification in 2016. The company has both advanced equipment and talents, domestic advanced testing equipment, and over 30 years of professional and technical personnel with intermediate and senior titles. In addition, the company has a professional transportation team, and owns 10 liquid PAC tankers and 5 vans, which can fully guarantee the timeliness of product supply.

Why Choose Us

FAQ

1. Who are we?
We are based in Jiangsu, China, start from 1990s,Our company currently has more than 70 employees and has a complete set of production and quality management systems.

2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3. What can you buy from us?
Polyaluminium Chloride,Polyferric Sulfate,Polyaluminium Ferric Chloride,Polyacrylamide,Aluminium Sulfate,etc.

4. Why should you buy from us not from other suppliers?
Over 20 years research and developmment technology accumulation

Several custimization available

Mature manufacture system

Critic Material quality control

Powerful logistics team

Professional after-sales system

5. What services can we provide?
Accepted Delivery Terms: FOB,CIF,CFR,DDP,etc.
Accepted Payment Currency: USD, EUR, HKD, GBP, CNY;
Accepted Payment Type: T/T, L/C or D/P. You can choose the one which is convenient for you;
Language Spoken:English,Chinese

 

6. I have more questions, how to contact you directly?

A: Welcome to contact us with below contacts:

Contacts: Miss. Janice

WhatsApp&Wechat&Cell: +86 13337923706

Email address: janice@lanyaochem.com