Efficient Oil Water Separation Agent For Municipal Waste Water Treatment
Efficient Oil-water Separation Agent
Product Introduction:
This product is a highly cationic polyelectrolyte that is soluble in water and has good stability. It has electric neutralization and strong adsorption bridging effects, making it suitable for oil-water separation in oil recovery. For wastewater or wastewater containing anionic chemicals or negatively charged fine particles, whether used alone or in combination with inorganic coagulants, it can achieve rapid and effective separation or purification of water. It has a synergistic effect, which can accelerate the flocculation speed and reduce the cost of product use.
| Model | SB-501 | SB-502 |
| Appearance | Colorless or light yellow transparent viscous liquid | |
| Solids % | 40±1 | 10±1 |
| Viscosity/mpa·s(25℃) | 50000-100000 | 10000-30000 |
| pH(1% Water Solution) | 4.0-7.0 | 4.0-7.0 |
Product Application:
The oil-water separation agent is suitable for the treatment of oilfield crude oil secondary and tertiary recovery, as well as the production of oil recovery wastewater from oilfield polymer flooding. It is also suitable for the treatment of middle stage wastewater and deinking wastewater in refineries, paper mills, urban underground wastewater, etc. It can quickly coagulate oily wastewater treatment, food factories oily wastewater treatment, and oil removal. The oil removal rate is high, and the separated oil-water is clearer, which is much lower than the amount of sludge produced by using inorganic flocculants such as polyaluminum chloride to treat wastewater, Thus greatly reducing the cost of sewage treatment.
Packaging And Storage:
This product is sealed in 50KG and 125KG plastic drums to avoid contact with oxidants, and has a shelf life of one year at room temperature.
Company Profile&Certification
Lanyao was established since 1998,in the start-up stage, as a watertreatment chemicals distributor, we provided product sales and technical supports for various regional sewage plants in East China.
Since Eastern China has always been a concentrated area for the development of light and heavy industries in the early 20th century, the water qualities of sewage plants in various regions are relatively different and complicated so that the treatment is relatively difficult. Therefore, we usually send technicians to the site and conduct micro-experiments based on detection report on COD,BOD,SS,ammonia nitrogen,total phosphorus,heavy metal and other impurities.As that we can match the appropriate type of chemicals to obtain the best treatment effect.
Until 2006, according to nearly ten years of technology accumulation and research on various types of chemicals, cooperating with experts and professors from various colleges and universities, Lanyao manufacturing-type enterprise was settled in yixing, jiangsu province.
Lanyao produces a wide range of chemicals used in water treatment processes, including coagulants, flocculants, PH adjusters such as polyaluminium chloride, poly ferric sulphate, sodium acetate and polyaluminium ferric chloride, etc. The company is now located in the Chemical Industry Zone in Jiangsu Province, with a factory area of 17,000 square meters and 108 employees.
We have a complete set of production management and quality control systems. We got the 1SO9001 quality system certification in 2012, the ISO14001 environmental system certification in 2014, and the occupational health and safety management system certification in 2016. The company has both advanced equipment and talents, domestic advanced testing equipment, and over 30 years of professional and technical personnel with intermediate and senior titles. In addition, the company has a professional transportation team, and owns 10 liquid PAC tankers and 5 vans, which can fully guarantee the timeliness of product supply.
FAQ:
We are located in Yixing Chemical Industrial Park, Jiangsu Province, with convenient transportation of sea and land transportation. Lanyao was established since early 1990s, have been specializing in the production of water treatment chemicals for over 20 years
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Polyaluminium Chloride,Polyferric Sulfate,Polyaluminium Ferric Chloride,Polyacrylamide,Aluminium Sulfate
4. Why should you buy from us not from other suppliers?
Over 20 years research and developmment technology accumulation Several custimization available Mature manufacture system Critic Material quality control Powerful logistics team Professional after-sales system
5. What services can we provide?
Accepted Delivery Terms: FOB, CIF；
Accepted Payment Currency: USD, EUR, HKD, GBP, CNY;
Accepted Payment Type: T/T;
Language Spoken:English,Chinese
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.