60L Open Plastic Barrel/Bucket With Iron Ring With Round Shape

Specifications:

Product Instructions:

1. Unfilled liquids shall be tested for at least 6 months.

2. Do not contain substances that react with the drum or severely weaken the drum.

3. The temperature of filling liquid should not be higher than 60℃. The screw lid shall be screwed after filling liquid is cooled to normal temperature, with a torque of 25N • m ~ 30N • m being appropriate.

4. Before tightening the lid, check whether the sealing ring is installed in place and whether it falls off. When screwing the lid, aim at thread teeth to avoid leakage at drum mouth caused by slipping thread after wrong thread.

5. Liquid containing gas should adopt a closed lid of exhaust and tighten as required.

6. When the drum is filled with liquid, there must be enough space capacity.

7. When stacking czplasticfactory square plastic drum, the internal liquid should be cooled to room temperature before proceeding stack.

8. Avoid dropping during transportation and use, and avoid collision with hard sharp objects.

9. Drums should be stored in a clean, dry, well-ventilated, flat floor warehouse, and the storage temperature of the drums is ≤40℃.

10. The storage life of the drum is 2 years from the production date.

11. The inner container should be packed in a suitable outer packaging. The outer packaging must not have any protruding parts that will scratch the inner container.

Feature

Good stacking performance, saving storage space
Excellent anti-drop performance, tight fit of barrel lid and barrel body, safe and reliable transportation
Easy unloading, easy cleaning, reuse and cost saving
Open and close easily and flexibly
Can body: blow molding, HDPE material, blue
Barrel cover: HDPE raw material, natural rubber sealing material
Breathing device: natural rubber material, air plug type
Tensioning ring: made of silver-gray galvanized steel plate, with red polyethylene safety insert locking method to ensure transportation safety

Quick Details:

Volume: 60liters
Dimensions: 400mmX325mmX620mm(H)
Materials: HDPE
Cap Size: DIA368mm
Color: White/ blue, other colors can be customized.
Usage: Water / Chemical or other solid or liquid products