UV Surface Spc Interlocking Flooring
Raw materials 100% environment protection
SPC floor is mainly made with calcium powder, Resin and a kind of stabilizer, which is 100% environmental protection floor without any hazardous substance, like heavy metal or formaldehyde.
| Thickness | 3.5mm,4mm,5mm,5.5mm,6mm | ||
| Wear Layer | 0.3mm,0.5mm,0.7mm | ||
| Dimensions | 184*1220mm(7″x48″) | 151*920mmm(6″x36″) | Customized |
| Material | 100% virgin material | ||
| Backing Layer | EVA,IXPE,Cork etc. | ||
| Edge Detail | Squared edge & Beveled edge available | ||
| Surface Treatment | UV coating | ||
| Surface Texture | Wood grain | Flat grain | Deep embossing grain |
| Impact grain | Hand-scraped grain | Light embossing grain | |
| Feature | Formaldehyde Free | Waterproof | Strong Stability |
| Varieties Design | Non-Slip | Fire proof | |
| Installation | Easy Installation | DIY installation | Unilin Click |
| Application | Indoor area,Decoration material,Office,Household,Hotel,Shoping center,School,Hospital,Residential and Commercial.... | ||
Click Here To Get Your Free Sample
Precautions Before Installation
· SPC floor should be leveled and placed on site with constant temperature and stability for 24 hours before installation;
· Make sure the floor is smooth and clean before installing the floor, without any residue;
· When installing the floor, the indoor temperature should be kept between 15 and 28 degrees Celsius.Indoor temperature and surface temperature 15 are appropriate, and should not be applied below 5 and above 30. The relative air humidity suitable for construction should be between 20% and 75%.
· The moisture content of the base layer should be less than 3%. The strength of the base layer should not be lower than the requirement of concrete strength C-20, otherwise suitable self-lev-eling should be used to strengthen the strength. The surface hardness of the base layer is not less than 1.2 MPa.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.