Luxury Vinyl Spc Flooring Tiles Raw Materials 100% Environment Protection Interior 3mm-6mm

The Composition Of Spc Floor

SPC floor is mainly made with calcium powder, Resin and a kind of stabilizer, which is plasticized under high temperature to squeeze out sheets. Its nickname is also called Stone Polymer Core ,Stone Plastic composite and Rigid core plank. Four-roll calendars are used to apply hot pack method to colored film decorative layer and wear-resistant layer, besides,production line of UV coating paint is applied.

Structure Diagram

Installation Steps

Precautions before installation

· SPC floor should be leveled and placed on site with constant temperature and stability for 24 hours before installation;

· Make sure the floor is smooth and clean before installing the floor, without any residue;

· When installing the floor, the indoor temperature should be kept between 15 and 28 degrees Celsius.Indoor temperature and surface temperature 15 are appropriate, and should not be applied below 5 and above 30. The relative air humidity suitable for construction should be between 20% and 75%.

· The moisture content of the base layer should be less than 3%. The strength of the base layer should not be lower than the requirement of concrete strength C-20, otherwise suitable self-lev-eling should be used to strengthen the strength. The surface hardness of the base layer is not less than 1.2 MPa.