Metal Shaft Sealed Rotary Potentiometer With Switch Single Unit RV9312NS
RV9312NS Rotary Potentiometer Single Unit Metal Shaft Sealed Potentiometer With Switch
Description of Rotary Potentiometer
The rotating potentiometer is an adjustable electrical resistor, which wipes on the resistors by the brush, and obtains the output voltage associated with the input voltage in the circuit. It is mainly used for walkie-talkie,multimedia audio, automobile power amplifier, smart home, computer peripheral, etc.
Features of Rotary Potentiometer
Good sealing performance
Using plastic sealing structure, can effectively deal with wave welding.
Can be with positioning.
With rotation switch.
Shaft length and shape can be adjusted.
A variety of mounting methods for choice.
Product Specification
| 1.Electrical Characteristics | |
| Total resistance | 200Ω-2MΩ |
| Total resistance tolerance | 200Ω~1KΩ:±30%/1KΩ~500KΩ:±20%/500KΩ~3MΩ:±30% |
| Residual resistance | 20ΩMax. |
| Rated Power | Linear taper:0.05W, Audio Taper 0.025W |
| Insulation resistance | 100MΩ min. 250V DC |
| Noise | 100mV Max |
| Voltage proof | 100V AC for 1 minute |
| Maximum operation voltage | 50V AC/20V DC |
| 2.Mechanical Characteristics | |
| Rotation stopper strength | Min:4Kgf |
| Total rotation angle | 300o±5o |
| Totational torque | 10-150gf.cm |
| Key push-pull strength | Min:8Kgf |
| Key Wobble | Max: 0.6*L/20mm P-P |
| Terminal Strength | 5N for 1 minute |
| 3.Switch Characteristics | |
| Switch Type | SPST |
| Rated Power | 1A 16V DC |
| Switch Torque | 500gf.cm Max |
| Switch Angle | 40o Max |
| Operating Life without load | 15000 cycles 100mΩ Max |
| Operating life with load:as rating | 15000 cycles 200mΩ Max |
| Initial contact resistance | 100mΩ Max |
| Insulation resistance | 100MΩ min. 250V DC |
| Voltage proof | 300V AC for 1 minute |
| 4.Environmental Performance | |
| Operating temperature range | -10oC to +70oC |
| Storage temperature range | -40oC to +85oC |
| 5.Welding heat reference | |
| Manual Soldering | 350oC±10oC/3+1S |
| Wave Soldering | 260oC±5oC/10±1S |
Our Advantage
1. More than 10 years of experience in research and development production design.
2. 10 automation production lines, more than 100 experienced workers for higher precision products.
3. 10+ dedicated and experienced engineers and designers in R&D department.
4. Support ODM/OEM customized service. Help customers quickly design their ideas into mass production solutions, and complete prototype design, development and verification.
5. Professional Testing instruments and team to ensure product quality.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.