TI-OR12 Common Mode Choke Inductor Customizated 10mm Toroidal Magnetic Coil

What is an inductor

The inductor consists of a coil of conducting material- insulated copper  wrapped around a core of a ferrimagnetic  material which is called an "iron core" inductor.

An inductor is characterized by its inductance, which is the ratio of voltage to the rate of change of current.

Charactor of Inductor’s

The flow of current produces a magnetic field, and the change in the magnetic field produces the opposite current.

Convert electrical energy into magnetic energy and store it.

Direct current can pass through, but alternating current does not pass easily at higher frequencies.

Product Features:

1.The inductance and wire spec can be customermized

2.Magnetic Coil:10mm

3.Stable thermal capability.

4.Low magnetic leakage.

5.High operation frequency.

6.Low DC resistance & Low loss.

7.High saturation materal & high efficiency.

8.Excellent current choking performance.

9.Complaint to RoHS Directive

Application of inductors

Inductors' applications range from the use of large inductors in power supplies, which along with filter capacitors remove multiples of the mains frequency of the DC output , to small inductors of ferrite beads or toris installed around the cable to prevent radio frequency interference in transmission along the wire.In many switching power supplies, the inductor works as energy storage device to produce DC current. The inductor powers the circuit, keeps the current flowing during the "off" switch, and makes possible a topology in which the output voltage is higher than the input voltage.