RI3362M Square Trimmer Potentiometer Adjustable Trimming Resistor Pin In Row
RI3362M Trimmer Potentiometer Single Turn Adjustable Trimming Resistor Pin In Row
Product features
Single-Turn
Cermet
Sealed
Industrial
Miniature package
Tape and reel packaging available
RoHS Compliant
What is Trimmer Potentiometer
Trimmer potentiometer is a resistor that can be adjusted or "trimmed" to a precise resistance by turning a screw. This type of resistor is often used in circuits because it allows adjustment of circuit performance. Use a tool (such as a screwdriver) to turn the dial or knob on the device to adjust. Trimmer resistor symbols are shown below.
Product Characters
| 1.Physical Characteristics | |
| Mechanical Angle | 270 ° nom. |
| Torque | 3.0 oz-in (3.3 g.cm) max. |
| Stop Strength | 7.0 oz-in (7.88 g.cm ) min. |
| Terminals | Solderable pins |
| Weight | 0.06g |
| Marking | Resistance code (for example 10KΩ marked 103) |
| Wiper | 50 % (Actual TR) ±10 % |
| Flammability | UL 94V-0 |
| Standard Packaging | 50 pcs. per tube |
| Adjustment Tool | H-90 |
| 2.Electrical Characteristics | |
| Adjustability Voltage divider | ±0.05% |
| Total resistance (standard resistance range) | 100Ω-3MΩ |
| Total resistance tolerance | ±10% |
| Residual resistance(Absolute minimum resistance) | 1% or 2ohms |
| Insulation resistance | 500vdc. 1000mΩ min. |
| Rheostat | ±0.15% |
| Dielectric Strength | 80,000 feet:350 vac;Sea Level:900 vac, |
| 3.EnvironmentalCharacteristics | |
| Adjustment Angle | 240o |
| Power Rating (300 volts max.) | 70oC:0.5W,125oC:0W |
| Temperature range | -55oC to +125oC |
| Temperature Coefficient | ±100 ppm/°C |
| Seal Test | 85 °C Fluorinert |
| Humidity | 96 hours (2 % ΔTR; 10 mΩ IR) |
| Vibration | 30 G (1 % ΔTR; 1 % ΔVR) |
| Shock | 100 G (1 % ΔTR; 1 % ΔVR) |
| Load Life | 1,000 hours 0.5W@ 70 °C (3 % ΔTR; 3 % or 3 ohms,whichever is greater, CRV) |
| Rotational Life | 200 cycles (4 % ΔTR; 3 % or 3 ohms,whichever is greater, CRV) |
Our Advantage
1.Design and prototype automation basis in Dongguan which is the manufacturing center of South China.
2.10+ dedicated and experienced engineers and designers in R&D department.
3.Manufacture Center in Sichuan Province which is close to Yangzi River wharf and Chongqing Airport .
4.10+ production lines, 100+ experienced managers and workers.
5.Help customers quickly design their ideas into mass production solutions, and complete prototype design, development and verification.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.