Hose Dredge Floater For Pipe Marine At Sea Machine Hose Flotation Device
Floats Marine Dredging Pipeline Floater For Dredging Project
Product performance characteristics:
1. Good toughness and excellent impact resistance, especially suitable for offshore construction.
2. Light weight, easy to install and carry, and low transportation and transfer cost.
3. Wear resistance and long service life.
4. The price is low, and the performance-price ratio is significantly better than the steel buoy.
Note:
1. Two sections of the floating body are one group (one section consists of two pieces), which can float up to 6 meters of mud pipe and 1.5 meters of rubber hose;
2. Floating bodies of various specifications with an outer diameter of 4 meters and a length of less than 4 meters can be produced.
Polyethylene Hull Mechanical Strength
| No. | Item | Performance | |
| 1 | Tensile Strength Mpa≥ | 12 | |
| 2 | Elongation at break %≥ | 10 | |
| 3 | Impact Strength KJ/㎡ | 31 | |
| 4 | Bending Strength Mpa≥ | 15.7 | |
| 5 |
Weather Resistance (total 3.5GJ/㎡ aging capacity) |
Elongation at break %≥ |
10 |
| 6 | OIT 200℃ mm≥ | 10 | |
| Item | Out shell data | Item | Inner Foam |
| Tensile Strength | ≥13.1MPa | Absorption | 1-2g/100cm2 |
| Elongation at break | ≥11.1% | Breaking Strength | 0.08-0.1MPa |
| Impact strength | ≥32.1KJ/m2 | Elongation at break | 4-6% |
| Bending Strength | ≥15.7MPa | Compressive strength | 0.1-0.24MPa |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.