12mm Eco Friendly Grooved Felt Wall Panels Office Decoration Panels

Product Parameters

Installation Method

1. Polyester wall panel
A simple method is to install the polyester fiber acoustic panels with white glue and gun nails directly. Or you can leave a gap between the panel and the wall for better acoustic performance.

2. Polyester ceiling tile
When the polyester fiberboard used as a ceiling panel, you can cut into small pieces. The polyester fiber acoustic panels can be attached to the keel by gluing or stitching. Board edge can be modified with a practical knife. Various carving patterns are possible, and the board can also be bent, too.

3. Polyester sound absorber
Polyester fiber panel has toughness and tensile strength that can be attached directly to the edge of the plate with clips or suspension parts, making it acoustic clouds or baffle.

FAQ

Is the position of the sound absorbing panels important?
In general, it is not important that where to place the sound absorbing panels in the room. Visually pleasing appearance is usually the guiding factor for placement. The most important thing is to simply get the total quantity of needed sound absorbing panels in the area. No matter where the panels are placed, the panels will absorb the extra sounds from each surface of the room.

In other words, we do have a few non-critical guides on the placement of acoustic panels.

First, when the panel is placed in or near the corner, you can get more absorption per square meter of the panel. In other words, if you place some of them around or near the corner, your room will need a little less panel.

Second, if the room has a major source of sound, such as a speaker at the corner of the room, it is best to place the panel at the first reflection point. These are where the sound comes from the source, bounces once and reaches the audience. For example, the middle between the listener and the speaker is a first reflection point where your brain must sort out multiple copies of the same voice, making things sound less clear, making the speech more difficult to understand. Adding sound absorbing panels at the first reflection point reduces the late sound so that your brain can focus on a clear copy of the sound.