ODM Well Logging Tools Geophysical Deep Well Logging Equipment 220V
Deep Well Logging Equipment Well Logging Tools
Well logging tools are used to obtain information about the geology, structure, and fluids present in a wellbore. Here are the general steps for using well logging tools:
1. Preparation: Before logging, the wellbore must be properly prepared. This includes cleaning the well, removing debris, and ensuring that the tool can be lowered and raised safely.
2. Tool selection: Different well logging tools are used to obtain different types of information. The tools selected depend on the purpose and goals of the logging.
3. Tool deployment: The logging tool is lowered into the wellbore either on a cable. The logging tool is then run vertically through the wellbore.
4. Data collection: As the logging tool moves through the wellbore, it collects data such as temperature, pressure, and electrical conductivity. This data is transmitted to the surface for analysis.
5. Interpretation: After the data is collected, it is analyzed by geologists and other experts. The information collected from the logs can be used to create a log or cross section of the wellbore, which can help to identify potential oil and gas reserves.
Technical Specification
| Dip (inclination): | 0° -- 50° | Accuracy: | ±0.5° | |
| Azimuth: | 0° -- 360° | Accuracy: | ±3°(typical @dip≥4°) | |
| Resolution: | Azimuth:1° | Dip:0.1° | ||
| Endurance: | About 6 hours (Using DC Power) | |||
| Pressure: | 250 bar | |||
| Dimensions: | Diameter Ø40 mm, Length 1230 mm, Weight 6 kg | |||
| Storage: | 10 Projects with 99 shots each | |||
| Temperature: | -10°C -- +60°C | |||
| Power Supply: | 220V AC input or use internal DC battery | |||
Product Display
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.



