18M2 MBR Membrane Module Elements Wastewater Treatment Hollow Fiber Module
18M2 MBR Membrane Elements for Wastewater Treatment with PVDF material
MBR is an activated sludge treatment system that improves treatment performance and consistency compared to conventional activated sludge systems by using a physical membrane barrier for liquid-solids separation instead of traditional gravity clarification. This technology complements our anaerobic technologies by aerobically polishing anaerobically pretreated wastewater, and can also be used as a stand-alone process.The MBR can treat wastewater from a wide variety of industries. The MBR system’s long solids retention time and physical membranes work together to provide more consistent removal of organics, ammonia, and nitrogen than conventional activated sludge systems. The biochemical oxygen demand (BOD) and total suspended solids (TSS) concentrations discharged from the process are negligible, and very low effluent phosphorus concentrations can also be reached.
- Produces a very high-quality effluent
- Can meet strict discharge limits for BOD, TSS, nitrogen, and
- osphorus
- Suitable for water reuse or direct discharge
- Small footprint
- Operates at high mixed liquor suspended solids concentrations (8,000 – 15,000 mg/l)
- Long solids retention time
- Increased stability against changes in influent characteristics
- Membrane barrier ensures complete solids retention and process stability
MBR Benefits
COSTING SAVINGS
- Eliminate wastewater surcharges
- Reduce sludge handling and disposal costs
- Low sludge yield
- Save on chemical costs
- Reduce nutrient requirements
- Eliminate polymer usage
- Reuse water in plant operations
ENVIRONMENTAL BENEFITS
- Can meet strict discharge limits for BOD, TSS,T261 nitrogen, and phosphorus
- Produces a very high-quality effluentOperates at high mixed liquor suspended solids concentrations (8,000 – 15,000 mg/l)
- Long solids retention time
- Increased stability against changes in influent characteristics
- Membrane barrier ensures complete solids retention and process stability
- Eliminates issues with gravity clarification
- High hydraulic and organic peak capabilities
- Suitable for water reuse, improves plant’s water security
- Suitable for direct discharge
- Small footprint
PROCESS ADVANTAGES
- Operates at high mixed liquor suspended solids concentrations (8,000 – 15,000 mg/l)
- Long solids retention time
- Increased stability against changes in influent characteristics
- Membrane barrier ensures complete solids retention and process stability
- Eliminates issues with gravity clarification
- High hydraulic and organic peak capabilities
SIMPLIFIED OPERATION & MAINTENANCE
- Superior membrane durability and performance with low maintenance
- Long lifetime
- Simple, infrequent cleaning procedure
- Membranes are cleaned in place
- Low operator attention requirements
- Reduces or eliminates disinfection
- Data trending for process control
| Item/Model | KH-MBR-8-CO-PVDF | KH-MBR-12-CO-PVDF | KH-MBR-15-CO-PVDF |
| Membrane Area(M2) | 8 | 12 | 15 |
| Height | 1050 mm | 1550 mm | 1550 mm |
| Width | 645 mm | 645mm | 645 mm |
| Thickness | 47 mm | 47mm | 47mm |
| Dry Weight | 6kgs | 10kgs | 12 kgs |
| Membrane material | Reinforced PVDF | Reinforced PVDF | Reinforced PVDF |
| Micro pore size | 0.05μm | 0.05μm | 0.05μm |
| ID/OD of Membrane | 0.9/2.2mm | 0.9/2.2mm | 0.9/2.2mm |
| Suspend solid | <5mg/L | <5mg/L | <5mg/L |
| Temperature | 5-40℃ | 5-40℃ | 5-40℃ |
| PH range | 2~11 | 2~11 | 2~11 |
| Flux for waste water | 15~20 LMH | 15~20 LMH | 15~20 LMH |
| Operating Method | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins |
Sucking out 8 mins and staying 2 mins |
| Cleaning Chemicals | 500-3000ppm Sodium hypochlorite | 500-3000ppm Sodium hypochlorite |
500-3000ppm Sodium hypochlorite |
| Item/Model | KH-MBR-25-CO-PVDF | KH-MBR-30-CO-PVDF | KH-MBR-35-CO-PVDF |
| Membrane Area(M2) | 25 | 30 | 35 |
| Height | 1560 mm | 1810 mm | 1810 mm |
| Width | 1040 mm | 1040 mm | 1250 mm |
| Thickness | 47 mm | 47mm | 35 mm |
| Dry Weight | 20 kgs | 25 kgs | 30 kgs |
| Membrane material | Reinforced PVDF | Reinforced PVDF | Reinforced PVDF |
| Micro pore size | 0.05μm | 0.05μm | 0.05μm |
| ID/OD of Membrane | 0.9/2.2mm | 0.9/2.2mm | 0.9/2.2mm |
| Suspend solid | <5mg/L | <5mg/L | <5mg/L |
| Temperature | 5-40℃ | 5-40℃ | 5-40℃ |
| PH range | 2~11 | 2~11 | 2~11 |
| Flux for waste water | 15~20 LMH | 15~20 LMH | 15~20 LMH |
| Operating Method | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins |
Sucking out 8 mins and staying 2 mins |
| Cleaning Chemicals | 500-3000ppm Sodium Hypochlorite |
500-3000ppm Sodium Hypochlorite |
500-3000ppm Sodium hypochlorite |
Why Choose us?
1). Over 20 years experience in UF and MBR membrane
2). Excellent cooperation partner
3). Own an excellent technical team
4). Advanced R & D capability
5). International management system(ISO9001)
6). Located in Jiangsu, convenient for export transportation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.