200G QSFP56 to QSFP56 Active Optical Cable AOC OM3 Optic Fiber Patch Cord Use For Data Center Equipment
200G QSFP56 to QSFP56 Active Optical Cable AOC OM3 Optic Fiber Patch Cord Use For Data Center Equipment
Ordering information
| Part Number | Product Description | Fiber Spec. |
| S-Q52AA003-C |
200G QSFP56 AOC Cable 3M |
0~70℃ |
Description
Springtek 200G QSFP56 Optical Transceiver modules are designedfor usein200Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber. They are compliant with the QSFP MSAandwith IEEE 802.3cd 200GBASE-SR4 specification. Digital diagnostics functions are availableviatheI2Cinterface as specified by CMIS V4.0.
Springtek 200G QSFP56 Optical transceiver is RoHS 2.0 compliant and lead-free per Directive2011/65/EU.
Features
- Supports IBTA InfiniBand HDR
- Up to 200Gb/s data rate
- 4x 50Gb/s PAM4 modulation
- SFF-8665 compliant QSFP56 port
- SFF-8636 compliant I2C management
- Single 3.3V power supply
- 4.5W power dissipation each end, with retiming
- Operating case tempcommercial:0°Cto+70°C
- RoHS6 compliant (lead free)
Applications
- 200Gb/s InfiniBand HDR systems
- Other optical links
Absolute Maximum Ratings
It has to be noted that the operation in excess of any individual absolute maximum ratings might cause permanent damage to this module.
| Parameter | Symbol | Min | Typical | Max | Unit |
| Storage Temperature | TS | -20 | - | 85 | ℃ |
| Relative Humidity | RH | 0 | - | 85 | % |
| Case Operating Temperature | TCase | 0 | - | 70 | ℃ |
| Supply Voltage | VCC | -0.5 | - | 3.6 | V |
Recommended Operating Conditions
Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.
| Parameter | Symbol | Min | Typical | Max | Unit |
| Power Supply Voltage | VCC | 3.135 | 3.300 | 3.465 | V |
| Operating Case Temperature | TC | 0 | 25 | 70 | °C |
Transmitter
| Parameter | Symbol | Min | Typical | Max | Unit |
| Signaling Speed per Lane | PRBS31Q@26.5625Gbd PAM4 | Gb/s | |||
| Center Wavelength | C | 840 | 850 | 860 | nm |
| Differential Input Impedance | Zin | 90 | 100 | 110 | Ohm |
| Differential Input Voltage | Vin | -- | 900 | - | mVp-p |
| Differential termination mismatch | - | - | - | 10 | % |
| DC common mode voltage | - | -350 | - | 2850 | mV |
Receiver
| Parameter | Symbol | Min | Typical | Max | Unit |
| Signaling Speed per Lane | PRBS31Q@26.5625Gbd PAM4 | Gb/s | |||
| Center Wavelength | lC | 840 | 850 | 860 | nm |
| Differential termination mismatch | - | - | - | 10 | % |
| Differential Output Impedance | Zout | 90 | 100 | 110 | Ohm |
| Differential Output Voltage | Vout | - | - | 900 | mVp-p |
| DC common mode voltage | - | -350 | 2850 | mV | |
| Error Bit Rate | BER | - | - | 2.4E-4 | PRBS31Q@26.5625Gbd PAM4 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.