10G AWG SFP + Direct Attach Copper Cable 10G SFP+ DAC Cable 7M
10G AWG SFP + Direct Attach Cable 10G SFP+ DAC Cable 7M
Ordering information
| Part Number | Product Description | Fiber Spec. |
| S-FP10P007-C | 10G SFP+ DAC Cable 7M | 0~70℃ |
Description
Springtek 10Gbps SFP+ passive cable assemblies are high performance, cost effective I/Osolutions for 10GEthernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufacturestoachieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable ssemblies meet and exceed Gigabit Ethernet and Fiber Channel industrystandard requirements for performance and reliability.
Features
- Support for multi-gigabit data rates up to 10.5Gbps
- Data rates backward compatible to 1Gbps
- Hot-pluggable SFP 20PIN footprint
- I/O Connector designed for high speed differential signal applications
- Improved Pluggable FormFactor(IPF) compliant for enhanced EMI/EMC performance
- Compatible to SFP+ MSA
- Temperature Range: 0~ 70 °C
- Comply with RoHS 2.0
Applications
- High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
- Switched fabric I/O such as ultra high bandwidth switches and routers
- Data center cabling infrastructure
- High density connections between networking equipment
Recommended Operating Conditions
| Parameter | Symbol | Min | Typ | Max | Unit |
| Storage Ambient Temperature | Ts | -40 | +85 | °C | |
| Operating Case Temperature | Tc | 0 | +70 | °C | |
| Relative Humidity(non-condensation) | RS | - | 85 | % |
Systems
| Performance | Media |
|
10.5 Gpbs line speed, full duplex Bit error rate: better than 10E-12 |
Hot-pluggable, industry-standard Small Form-Factor Pluggable(SFP+) copper cable, available as 7m,10m or 15m. |
Pin Definitions
| Pin | Logic | Symbol | Name/Description | Notes |
| 1 | VeeT | Transmitter Ground | ||
| 2 | LV-TTL-O | TX_Fault | N/A | 1 |
| 3 | LV-TTL-I | TX_DIS | Transmitter Disable | 2 |
| 4 | LV-TTL-I/O | SDA | Tow Wire Serial Data | |
| 5 | LV-TTL-I | SCL | Tow Wire Serial Clock | |
| 6 | MOD_DEF0 | Module present, connect to VeeT | ||
| 7 | LV-TTL-I | RS0 | N/A | 1 |
| 8 | LV-TTL-O | LOS | LOS of Signal | 2 |
| 9 | LV-TTL-I | RS1 | N/A | 1 |
| 10 | VeeR | Reciever Ground | ||
| 11 | VeeR | Reciever Ground | ||
| 12 | CML-O | RD- | Reciever Data Inverted | |
| 13 | CML-O | RD+ | Reciever Data Non-Inverted | |
| 14 | VeeR | Reciever Ground | ||
| 15 | VccR | Reciever Supply 3.3V | ||
| 16 | VccT | Transmitter Supply 3.3V | ||
| 17 | VeeT | Transmitter Ground | ||
| 18 | CML-I | TD+ | Transmitter Data Non-Inverted | |
| 19 | CML_I | TD- | Transmitter Data Inverted | |
| 20 | VeeT | Transmitter Ground | ||
|
Notes: 1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor 2. Active cable assemblies do not support LOS and TX_DIS |
||||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.