Electric Curtains Motor 24V 10-500RPM Used For Smart Device KG-5840DC24

Electric Curtains Motor 24V 10-500RPM Used For Smart Device KG-5840DC24

Lead Time

Product Description
 

Essential Details

Rated Current: ≤1.6A

Place of Origin: Guangdong, China

Type: Gear Motor

Warranty: 3 Years

Model Number: KG-5840GM24

Rated Voltage: 24V

Rated Speed: 10-500RPM

Application: Electric Curtains

Maximum Torsion: 10-70kg.cm

Rated Torque: 3.4-70kg.cm

Stop Current: 4.5A

Drawing

Sample

Application

A gear motor is a mechanical device used to increase/decrease by slowing down/increasing torque. It consists of two or more gears, one of which is driven by an electric motor. The output speed of the gear motor is inversely proportional to the gear ratio. Gear motors are often preferred in constant speed applications, such as conveyors and cranes, where they can provide increased torque. The load torque of DC gear motor has a direct relationship with the speed and current, the speed decreases linearly with the increase of the load, and the current increases linearly. 

A gear motor is a mechanical device used to increase/decrease by slowing down/increasing torque. It consists of two or more gears, one of which is driven by an electric motor. The output speed of the gear motor is inversely proportional to the gear ratio. Gear motors are often preferred in constant speed applications, such as conveyors and cranes, where they can provide increased torque.

The gear motor includes a drive gear with a certain diameter, connected with the drive mechanism (electric motor, wind turbine, diesel engine, etc.) another smaller gear gear (if the drive speed of the driven mechanism is higher than the drive mechanism) diameter (if the speed of the driven mechanism should be less than the speed of the drive mechanism) connected with the mechanical load being driven. Just speed/torque increase/decrease or vice versa mechanism. This is a mechanical motor attachment.

We can connect any number of gears together and can have different shapes and sizes. Whenever we transfer power from one gear to another, we can do one of two things: Gear motor bicycle gears increase speed: If two gears are connected together, one gear is more than the second, and the second gear has to turn faster to keep up. Thus, this arrangement means that the second round turns faster than the first, but with less force.

Property

1, the volume, the minimum diameter can be 3.4mm.
2, high transmission rate: single stage is greater than 96.5%, double stage is greater than 93%, three levels are greater than 90%.
3, smooth operation, low noise.
4, light weight, long service life, high carrying capacity.
5, customized parameters, power, wide application range.