ISO Painting Sculpture Polyurea Spray Gun Cold Polyurea Spray Tools
Painting Sculpture Spray Gun Polyurea Chemicals Cold Polyurea Spray Tools
Description of Cold Spray Polyurea Cartridge Elastomer
polyurea cartridge
Spray polyurea is a solvent free, pollution free green product, it has been applied on many major projects of anticorrosion waterproof protection field since its high physical and corrosion resistance property. But in normal conditions, spray polyurea must be applied with special machine which requires two hundred thousand RMB, and has high demand on the applicators ability, therefore it causes some inconvenience for the polyurea application. SWD Urethane USA developed a new simple-applied cold polyurea, it is a revolutionary product in polyurea industry that updated people’s understanding of polyurea technology, which created opportunity for the wider application scopes of spray polyurea.
Features of Cold Spray Polyurea Cartridge Elastomer
Characteristics
Cold polyurea is applied with a simple spray gun, easy to apply, one person can operate it. It can be directly sprayed in the temperature above 25℃, use a microwave to heat the liquid material to 35℃ if the environment temperature below 25℃. The curing time is adjustable from 2-10 min, can be sprayed forming on any curve, vertical or slope surface, without sagging. The coating is flexible, compact and seamless, with excellent comprehensive physical properties, no powdery, no peel off or crack after long term outdoor use, it is resistant to any cold & hot impact and weather changing corrosion.
Technical parameters of Cold Spray Polyurea Cartridge Elastomer
| Elongation | 472% |
| Tensile strength | 17.8Mpa |
| Volume solid content | 99% ±1% |
| VOC | 0 |
| Product Keywords | polyurea cartridge,fastkote? polyurea floor coating |
| Color | Multiple colors as customers’ need |
| Luster | glazed |
| Density | 1.01g/cm3 |
| Color Volume solid content | ≥98% |
| VOC | 0 |
| Recommended dry film thickness | 500-3000μm |
| Theoretical coverage | 1.02kg/sqm (calculated by the above solids percentage andry film thickness of 1000 microns) |
| Practical coverage | Allow appropriate loss rate |
| Surface dry time | 3-5min |
| Re-coating interval | ≤ 6h (20℃) |
| Re-coating method | two component air sprayer |
| Mix ratio | A:B=1:1 (by volume) |
| Normal package | 1.6kg/set (part A: 0.82kg, part B: 0.77kg) |
| Application temperature | 25-40℃ (use a microwave to heat the material to 35℃ wheapply in cold weather) |
| Flash point | 200℃ |
Images of Cold Spray Polyurea Cartridge Elastomer
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.