Keysight Agilent N5244A PNA-X Vector Network Analyzer 10 MHz-43.5GHz with 126 dB Dynamic Range and Built-in Second Source
Price:
Negotiable
MOQ:
1 set
Delivery Time:
1~3 working days
Brand:
Keysight Agilent
Product Description
Keysight Agilent N5244A PNA-X Vector Network Analyzer 10 MHz-43.5GHz
Product Overview
The PNA-X network analyzer is the world's most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
Key Features
- 10 MHz to 43.5 GHz frequency range
- 2- or 4-ports with two built-in sources
- 126 dB system and 129 receiver dynamic range, 32,001 points, 32 channels, 5 MHz IF bandwidth
- High output power (+16 dBm), low harmonics (-60 dBc) and wide power sweep range (41 dB)
- Best dynamic accuracy: 0.1 dB compression with +15 dBm input power at the receiver
- Low noise floor of -111 dBm at 10 Hz IF bandwidth
Applications
- S-parameters (CW and pulsed)
- Noise figure
- Gain compression
- Intermodulation and harmonic distortion
- Conversion gain/loss
- True-differential stimulus
- Millimeter-wave
- Nonlinear waveform and X-parameter® characterization
- Antenna test
X-parameters® is a registered trademark of Agilent Technologies. The X-parameter format and underlying equations are open and documented.
Available Options
| Option Code | Description |
|---|---|
| 008 | Pulsed-RF Measurements |
| 010 | Time-domain measurements |
| 020 | Add IF inputs |
| 021 | Add pulse modulator to internal first source |
| 022 | Add pulse modulator to internal second source |
| 025 | Add four internal pulse generators |
| 028 | Noise figure measurements using standard receivers |
| 080 | Frequency offset measurements |
| 081 | Reference Channel Switch (Adds internal switch to R1 Path)(Standard Option w/080) |
| 082 | Scalar calibrated converter measurements |
| 083 | Vector and scalar calibrated converter measurements |
| 084 | Embedded LO measurements |
| 086 | Gain compression measurements |
| 087 | Intermodulation distortion measurements |
| 088 | Source phase control |
| 118 | Fast CW mode |
| 1A7 | ISO 17025 compliant calibration |
| 1CM | Rack mount kit for installation without handles |
| 1CP | Rack mount kit for installation with handles |
| 200 | 2 ports, single source |
| 219 | Add extended power range and bias-tees to 2 port analyzer |
| 224 | Add internal second source, combiner and mechanical switches to 2-port analyzer |
| 29 | Corrected noise figure measurements |
| 301 | Application for use with standard CalPods |
| 302 | Application for use with temperature-characterized CalPods |
| 400 | 4 ports, dual source |
| 417 | 4-port dual source extended power range |
| 419 | Add extended power range and bias-tees to 4 port analyzer |
| 423 | Add internal combiner and mechanical switches to 4-port analyzer |
| 460 | Integrated true-mode stimulus application |
| 510 | Nonlinear component characterization |
| 514 | Nonlinear x-parameters |
| 518 | Nonlinear pulse envelope domain |
| 520 | Arbitrary load impedance X-parameters |
| 551 | N-port calibrated measurements |
| 897 | Built-in performance test software for Agilent inclusive calibration, perpetual license |
| 898 | Built-in performance test software for standards compliant calibration, perpetual license |
| A6J | ANSI Z540 compliant calibration |
| H85 | Removes bias tees between source attenuators and test port couplers |
| N1966A | Pulse/IO Adapter |
| N8981A | Spare hard drive for use with 1.1 GHz Pentium M CPU board Recommended for use in secure environments |
| PS-S10 | Remote scheduled productivity assistance. Select 1 to 999 hours. |
| PS-S20 | Startup assistance |
| PS-S20-01 | Recommended Startup assistance |
| PS-T10-PNA | PNA operator training for 8 students at the customer's site , H7215B-203 |
| PS-T12-PNA | PNA programming for 8 students at the customer's site , H7215B-204 |
| R-50C-011-3 | Agilent Calibration - 3 years |
| R-50C-011-5 | Agilent Calibration - 5 years |
| R-50C-016-3 | ISO 17025 Compliant Calibration - 3 years |
| R-50C-016-5 | ISO 17025 Compliant Calibration - 5 years |
| R-50C-021-3 | ANSI Z540-1-1994 Calibration - 3 years |
| R-50C-021-5 | ANSI Z540-1-1994 Calibration - 5 years |
| R-50J-001-3 | Onsite System Verification - 3 years |
| R-50U-001-3 | Onsite Agilent Calibration - 3 years |
| R-50U-002-3 | Onsite ANSI Z540-1-1994 Calibration - 3 years |
| R-51B-001-3C | Return to Agilent Warranty - 3 years |
| R-51B-001-5C | Return to Agilent Warranty - 5 years |
| R-51B-001-C | Return to Agilent Warranty - 1 year |
| R-51C-001-1CU | Onsite Warranty - 1 year |
| R-51C-001-3CU | Onsite Warranty - 3 years |
| UK6 | Commercial calibration certificate with test data |
Frequently Asked Questions
What is a RF Spectrum Analyzer?
A RF Spectrum Analyzer is an instrument used for measuring the amplitude of a signal as a function of frequency. It is mainly used for measuring the power of the spectrum of known and unknown signals.
What is the model number of the RF Spectrum Analyzer?
The model number is N5244A and it is manufactured by Keysight Agilent.
Where is the RF Spectrum Analyzer made?
The RF Spectrum Analyzer is made in Malaysia.
What is the minimum order quantity for the RF Spectrum Analyzer?
The minimum order quantity for the RF Spectrum Analyzer is 1 set.
What type of packaging is used for the RF Spectrum Analyzer?
The RF Spectrum Analyzer is packaged in a carton.
Product Images
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Meigaolan Electronic Instrument Co. Ltd
Location
RA1-B2,F32 of Dongjianghaoyuan, Baomin Rd, Bao'an District, Shenzhen,China
Contact Person
Dannie